Frigidaire DGEF3041KF, FGEF3032MW, FGEF3032MB, FGEF3032MF Setting lock feature, Setting the timer

Page 17

Setting lock feature

The oven control may be set to lock the oven door and most oven control keypad operations.

To set the lock feature:

Press and hold the keypad for 3 seconds. "Loc" will

appear in display, the "door locked" indicator light will flash and the motor driven door lock will begin to lock the oven door. Allow about 15 seconds for the oven door to fully lock. Once the oven door is locked, the current time of day will appear in the display.

To cancel the lock feature:

Press and hold the keypad for 3 seconds. The

control will unlock the oven door and resume normal keypad operation.

NOTES

To avoid possible damage to the oven door latch mechanism, do not attempt to force open or close the oven door whenever the "door locked" indicator light is flashing.

If a control keypad is pressed when the lock feature is active, "Loc" will appear in the display as a reminder that the keypad action requested is not available when the lock feature is active.

SETTING OVEN CONTROLS

Setting the timer

The built-in minute timer may be used as an extra reminder in the kitchen that will beep when the set time has run out.

To set the timer:

1.Press keypad once (do not hold keypad down).

2.Press the keypad to increase the time in one minute

increments. Press and hold the keypad to increase

the time in 10 minute increments. The timer may be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If the keypad is pressed first, the timer will initially advance to 11 hours and 59 minutes.

3.When the set time has run out, the timer will beep 3 times and will continue to beep 3 times every 60

seconds until is pressed.

To change the amount of time remaining:

When the timer is active and appears in the display, press

the or keypad to increase or decrease the time remaining.

To cancel the timer before the set time has run out:

Press keypad once.

NOTES

The timer does not start or stop the cooking process. The timer may be used alone or when any other oven function is active.

The indicator light located above the keypad will remain on whenever the timer is active.

The timer will display hours and minutes until 1 hour remains. When less than 1 hour remains, the display will count down in minutes and seconds. Once the timer has less than 1 minute remaining only seconds will display.

When cooking with an active timer, the timer will show in the display by default. To view information of any other active oven function, press the keypad once for the active function to view status.

17

Image 17
Contents Use&Care Product Record and Registration ContentsTip Over Hazard DefinitionsImportant Instructions for Using Your Oven When flaming foods under a ventilating hood, turn the fan on Important Safety NoticeOven vent location Before Setting Oven ControlsOven racks Oven rack stopAir circulation in the oven Types of oven racksBaking layer cakes with 1 or 2 oven racks Bottom oven rackTo assemble the Effortless Oven Rack system Effortless Oven Rack systemElement on & hot surface indicator lights Before Setting Surface ControlsAbout the ceramic glass cooktop About the radiant surface elementsCookware material types for the cooktop Using proper cookwareSuggested surface element settings Setting Surface ControlsSingle radiant surface elements To operate a single radiant elementTo operate a dual radiant element Dual radiant surface elements some modelsKeep warm zone some models National Center for Home Food Preservation Nchfp Home canningOven Control Functions Read the Instructions Carefully Before Using the OvenSetting the clock Setting Oven ControlsChanging temperature display mode F or C Setting for audible or silent keypad operationSetting the timer Setting lock featureTo change the oven temperature after bake has started Setting bakeBake time To set bakeStart time When the set bake time runs outSuggestions for quick bake Setting quick bakeHow quick bake works Easy probe MinimuminternalcookingtemperaturesProbe error message Proper probe placement in foodEasy probe cont’d To set easy probeTo set broil Suggested broil settings tableBroil Operating the oven light Adjusting the oven temperatureTo adjust oven temperature Read before starting self-clean SELF-CLEANINGSelf-clean To set self-clean Setting cleanWhen the self-clean cycle ends Restarting self-clean after a power failureTo set self-clean with delay start instructions Setting self-clean with start timeCleaning recommendation table Care & CleaningTo maintain the cooktop appearance Cooktop maintenanceCooktop cleaning Aluminum foil and oven liners Cooktop cleaning cont’dAluminum foil and oven liners cont’d Replacing the oven lightTo replace oven door Removing and replacing the lift-off oven doorTo remove oven door OvenControls section Problem Possible Causes SolutionsSolutions to common problems Before YOU Call Under Self-cleaning Problem Possible Causes Solutions Bake or self-cleanProblem Possible Causes Solutions Disclaimer of Implied Warranties Limitation of Remedies Major Appliance Warranty