Frigidaire FGEF3032MW, FGEF3032MB Before Setting Oven Controls, Oven vent location, Oven racks

oven vent location

BEFORE SETTING OVEN CONTROLS

Oven vent location

The oven vent is located under the left side of the control panel (See Fig. 1). When the oven is heating, warm air passes through this vent. This venting is necessary for proper air circulation in the oven which helps to provide good baking results. Do not block the oven vent.

Fig. 1

Oven racks

CAUTION

Always use oven mitts to protect hands from possible burns when using the oven or cooktop. The oven, oven racks and cooktop will become very hot.

Oven rack stop

Most oven racks slide on rack guides provided along the oven cavity sides. The rack guides are curved near the front of each guide. The curve will catch and hold the oven rack stable into a stop position when an oven rack is extended straight out from the oven.

For better access to food items in the oven, slowly pull the oven rack straight out to the oven rack stop position (Fig.

3)before checking on food items or removing food dishes from the oven.

rack

guides

Fig. 3

IMPORTANT

Do not remove or attempt to arrange oven racks with cookware still on the racks. To avoid damaging cookware or spilling food items, always remove any cookware first.

7	7
6	6
5	5
4	4
3	3
2	2
1 some	1 some
models	models
Oven with visible	Oven with hidden
bake element	Bake Element
Fig. 2
Recommended oven rack positions by food type
Food type	Position
Broiling meats	See broil
Cookies, cakes, pies, biscuits & muffins	4 or 5
Frozen pies, angel food cake, yeast, bread
and casseroles	2 or 3
Small cuts of meat or poultry	2 or 3
Turkey, roast or ham	1 or 2

Use only the offset oven (if equipped) rack if you choose to use rack position 7.

Removing, replacing & arranging most oven racks types

Arranging - always arrange oven racks when the oven is cool (prior to operating the oven).

To remove - Pull the
oven rack straight out
until it reaches the stop
position. Tilt up front of
oven rack to slide past the
stop position and pull the
rack out of the oven cavity
(Fig. 4).	Fig. 4

To replace - Rest the oven rack evenly between a left and right front guide along the oven walls so that the oven rack rests level. Tilt front of rack upward and slide rack in past the stop position. Then bring the rack to a level position and slide the rack completely inside oven (Fig. 5).

Fig. 5

6