Frigidaire FGEF3030PF Setting Surface Controls, Single radiant surface elements all models

Page 11

Single radiant surface elements (all models)

To operate the single radiant element:

1.Place correctly sized cookware on single radiant surface element.

2.Push in and turn the surface control knob in either direction (Fig. 2) to the desired setting (Refer to the

Suggested radiant surface element settings table Fig. 1). Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The surface control knobs do not have to be set exactly on a particular spot. Use the graphics provided as a guide and adjust the control knob as needed (See Fig. 2). Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

3.When cooking is complete, turn the radiant surface element OFF before removing the cookware.

Suggested radiant surface element settings

The suggested settings found in Fig.1 below are based when cooking with medium-weight aluminum pans with lids. Settings may vary when using other types of pans.

Suggested settings for single and dual radiant elements table

Settings

Type of cooking

 

 

High (HI - 9)

Start most foods, bring water to a

 

boil, pan broiling

 

 

Medium high (7 - 8)

Continue a rapid boil, fry, deep fat fry

 

 

Medium (5 - 6)

Maintain a slow boil, thicken sauces

 

and gravies or

 

steam vegetables

 

 

Medium Low (2 - 4)

Keep foods cooking, poach, stew

 

 

Low (LO - 1)

Keep warm, melt, simmer

 

 

 

Fig. 1

SETTING SURFACE CONTROLS

Fig. 2

CAUTION

•Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

•Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements.

IMPORTANT

Donotallowaluminumfoil,orANYmaterialthatcan melttomakecontactwiththeceramicglasscooktop. If these items melt on the cooktop they will damage the ceramic cooktop.

NOTES

•The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.

•The Element ON indicator lights will glow when one or more elements are turned ON. A quick glance at these indicator lights when finished cooking is an easy check to be sure all control knobs are turned OFF. The Hot Surface indicator light will continue to glow AFTER the control knob is turned to the “OFF” position and will glow until the heating surface area has cooled sufficiently.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Use&Care Product Record and Registration ContentsTip Over Hazard Important Safety InstructionsDefinitions Important Instructions for Using Your Oven When flaming foods under a ventilating hood, turn the fan on Important Safety NoticeYour electric range features include Appliance FeaturesTypes of oven racks Before Setting Oven ControlsOven vent location Removing, replacing & arranging racksSpecial dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Before Setting Surface Controls Cookware material types Using proper cookwareTypes of cooktop elements To operate the single radiant element Setting Surface ControlsSuggested radiant surface element settings Single radiant surface elements all modelsTo operate a dual radiant element Dual radiant surface elements some modelsMed Home Canning Oven Control Functions Read the Instructions Carefully Before Using the OvenSetting a silent control panel Setting Oven ControlsSetting the clock Changing temperature display F or CTo change the timer while it is in use Setting oven lockoutSetting the minute timer To set the oven lockout feature for models with Quick BakeTo set bake Setting bakeSetting timed bake and delayed timed bake features To change the oven temperature after bake has startedWhen the set bake time runs out Setting timed bake and delayed timed bake features cont’dSuggestions for Quick Bake Setting Quick BakeHow Quick Bake works To set Broil Setting broilSuggested broil settings table Operating the oven light Adjusting the oven temperatureTo adjust oven temperature Read before starting self-clean SELF-CLEANINGSelf-Cleaning When the self-clean cycle has completed Stopping or interrupting a self-clean cycleSetting a self-clean cycle Cleaning recommendation table Care & CleaningTo maintain the cooktop appearance do not Cooktop maintenanceCooktop cleaning Replacing interior oven light Cooktop cleaning cont’dAluminum foil and oven liners Aluminum foil and oven liners cont’dTo replace oven door Removing and replacing the lift-off oven doorTo remove oven door Controls section Problem SolutionSetting Oven Controls section Before YOU Call Solutions to common problems Cleaningsection Disclaimer of Implied Warranties Limitation of Remedies Major Appliance Warranty
Top Page Image Contents