SELF-CLEANING
Setting a
Setting a self-clean cycle
1.Remove all items and oven rack from the oven and close the oven door. Be sure the clock displays the correct time of day.
IMPORTANT
To start a
2. Press. The " : " in the time of day will flash.
3. Press and hold the | pad to scroll to the time to start |
the delayed
4. Press.
5. Press the | or | pad once. “3:00” will appear in |
the display indicating that a 3 hour
once (2:00 appears in the display).
(some models) To
time press once (4:00 appears in display).
NOTE
As soon as the controls are set, the motor driven lock will begin to automatically lock the oven door. The “LOCK” indicator light will flash. DO NOT open the oven door while the indicator is flashing (it takes about 15 seconds for the oven door to completely lock).
6."CLn" will appear in the display during the
When the self-clean cycle has completed:
1.The time of day will appear in the display window and the “Clean” and "LOCK" light will continue to glow.
2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has turned off, the oven door can be opened.
Stopping or interrupting a self-clean cycle
If it becomes necessary to stop or interrupt a self- cleaning cycle once it has been activated:
1.Press .
2.Once the oven has cooled down (about 1 hour) and the "LOCK" light has turned off, the oven door can be opened.
3.If needed, the
CAUTION
•To avoid possible burns use care when opening the oven door after the
•DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the oven door after the
NOTES
•Whenever the
cycle by pressing the keypad once. Remember
the oven door cannot be opened until the range has cooled sufficiently. You will need to add about 1 hour to the time displayed before you can use the oven for cooking again.
•After the oven door has unlocked and the oven has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.
24