Frigidaire FGEF3030PF To assemble the Effortless Oven Rack system

Page 8

BEFORE SETTING OVEN CONTROLS

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions).Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

 

door open and the oven rack in place, install one end of

IMPORTANT

•Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

•If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 thru 7. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

 

sure to test the oven rack operation by gently closing

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

CAUTION

Never pick up hot oven rack parts. Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack.

IMPORTANT

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

open oven

connector

door

arm

connector arm

Fig. 4

connector

arm

Fig. 5

left and right

door connector brackets

with connector arm ends shown in locked position (pointing upwards)

8

Fig. 6 - Effortless™ Oven Rack after assembly

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use&Care Contents Product Record and RegistrationTip Over Hazard Important Safety InstructionsDefinitions Important Instructions for Using Your Oven Important Safety Notice When flaming foods under a ventilating hood, turn the fan onAppliance Features Your electric range features includeBefore Setting Oven Controls Oven vent locationRemoving, replacing & arranging racks Types of oven racksSpecial dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Before Setting Surface Controls Cookware material types Using proper cookwareTypes of cooktop elements Setting Surface Controls Suggested radiant surface element settingsSingle radiant surface elements all models To operate the single radiant elementDual radiant surface elements some models To operate a dual radiant elementMed Home Canning Read the Instructions Carefully Before Using the Oven Oven Control FunctionsSetting Oven Controls Setting the clockChanging temperature display F or C Setting a silent control panelSetting oven lockout Setting the minute timerTo set the oven lockout feature for models with Quick Bake To change the timer while it is in useSetting bake Setting timed bake and delayed timed bake featuresTo change the oven temperature after bake has started To set bakeSetting timed bake and delayed timed bake features cont’d When the set bake time runs outSuggestions for Quick Bake Setting Quick BakeHow Quick Bake works To set Broil Setting broilSuggested broil settings table Operating the oven light Adjusting the oven temperatureTo adjust oven temperature Read before starting self-clean SELF-CLEANINGSelf-Cleaning When the self-clean cycle has completed Stopping or interrupting a self-clean cycleSetting a self-clean cycle Care & Cleaning Cleaning recommendation tableTo maintain the cooktop appearance do not Cooktop maintenanceCooktop cleaning Cooktop cleaning cont’d Aluminum foil and oven linersAluminum foil and oven liners cont’d Replacing interior oven lightTo replace oven door Removing and replacing the lift-off oven doorTo remove oven door Controls section Problem SolutionSetting Oven Controls section Before YOU Call Solutions to common problems Cleaningsection Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies
Top Page Image Contents