Frigidaire FGEF3030PF Setting Oven Controls, Setting the clock, Setting a silent control panel

Page 16

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". It is recommended to always set the clock for the correct time of day before using the appliance.

To set the clock:

1.Press once (do not hold pad down).

2.Within 5 seconds, press and hold the or until the correct time of day appears in the display.

NOTE

The time of day cannot be changed when the oven or self-clean is active.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1.Press and hold down for 5 seconds until a tone

sounds, " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press

and hold for 5 seconds until a tone sounds.

"12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

NOTE

Changing between continuous bake or the 12-Hour Energy saving mode does not change how the cooktop controls operate.

Changing temperature display (°F or °C)

The electronic oven control is set to display in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to display °C (Celsius) or from °C to °F (control should not be set for Bake or Self-clean when setting this feature):

1.Press . "— —" appears in the display.

2.Press and hold the until "HI" appears in the display.

3.Press and hold until °F or °C appears in the display.

4.Press the or to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

NOTE

The temperature display feature cannot be changed when the oven or self-clean is active.

Setting a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed

for silent operation. Press and hold . After 7

seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return

the sound, press and hold again for 7 seconds until the control beeps once.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Use&Care Contents Product Record and RegistrationDefinitions Important Safety InstructionsTip Over Hazard Important Instructions for Using Your Oven Important Safety Notice When flaming foods under a ventilating hood, turn the fan onAppliance Features Your electric range features includeBefore Setting Oven Controls Oven vent locationRemoving, replacing & arranging racks Types of oven racksTo assemble the Effortless Oven Rack system Effortless Oven Rack systemSpecial dark coating on the left and right rack Before Setting Surface Controls Types of cooktop elements Using proper cookwareCookware material types Setting Surface Controls Suggested radiant surface element settingsSingle radiant surface elements all models To operate the single radiant elementDual radiant surface elements some models To operate a dual radiant elementMed Home Canning Read the Instructions Carefully Before Using the Oven Oven Control FunctionsSetting Oven Controls Setting the clockChanging temperature display F or C Setting a silent control panelSetting oven lockout Setting the minute timerTo set the oven lockout feature for models with Quick Bake To change the timer while it is in useSetting bake Setting timed bake and delayed timed bake featuresTo change the oven temperature after bake has started To set bakeSetting timed bake and delayed timed bake features cont’d When the set bake time runs outHow Quick Bake works Setting Quick BakeSuggestions for Quick Bake Suggested broil settings table Setting broilTo set Broil To adjust oven temperature Adjusting the oven temperatureOperating the oven light Self-Cleaning SELF-CLEANINGRead before starting self-clean Setting a self-clean cycle Stopping or interrupting a self-clean cycleWhen the self-clean cycle has completed Care & Cleaning Cleaning recommendation tableCooktop cleaning Cooktop maintenanceTo maintain the cooktop appearance do not Cooktop cleaning cont’d Aluminum foil and oven linersAluminum foil and oven liners cont’d Replacing interior oven lightTo remove oven door Removing and replacing the lift-off oven doorTo replace oven door Setting Oven Controls section Problem SolutionControls section Before YOU Call Solutions to common problems Cleaningsection Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies
Top Page Image Contents