SETTING OVEN CONTROLS
MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature.
FEATURE |
| MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME | |
PREHEAT |
| 170°F/77°C | 550°F/288°C |
BAKE |
| 170°F/77°C | 550°F/288°C |
BROIL |
| 400°F/205°C | 550°F/288°C |
CONVECTION BAKE |
| 170°F/77°C | 550°F/288°C |
CONVECTION ROAST |
| 170°F/77°C | 550°F/288°C |
CONVECTION BROIL |
| 400°F/205°C | 550°F/288°C |
PIZZA |
| 170°F/77°C | 550°F/288°C |
CHICKEN NUGGETS |
| 170°F/77°C | 550°F/288°C |
TIMER | 12 Hr. Mode | 0:01 Min. | 11:59 Hr./Min. |
| 24 Hr. Mode | 0:01 Min. | 11:59 Hr./Min. |
CLOCK TIME | 12 Hr. Mode | 1:00 Hr./Min. | 12:59 Hr./Min. |
| 24 Hr. Mode | 0:00 Hr./Min. | 23:59 Hr./Min. |
DELAY START | 12 Hr. Mode | 1:00 Hr./Min. | 12:59 Hr./Min. |
| 24 Hr. Mode | 0:00 Hr./Min. | 23:59 Hr./Min. |
BAKE TIME | 12 Hr. Mode | 0:01 Min. | 5:59 Hr./Min. |
| 24 Hr. Mode | 0:01 Min. | 5:59 Hr./Min. |
SELF CLEAN TIME |
| 2 hours | 4 hours |
SETTING THE CLOCK
The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is fi rst plugged in, or when the power supply to the range has been interrupted, the timer in the display will fl ash.
To set the clock (example below for 1:30)
1.Press SET CLOCK. “CLO” will appear in the display.
2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.
3.Press START. “CLO” will disappear and the clock will start.
CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY
1.Press and hold SET CLOCK for 6 seconds. “CLO” will appear in the display.
2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.
3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.
4.Press START to accept the change or press CANCEL to reject the change.
5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
15