SETTING OVEN CONTROLS
ADJUSTING OVEN TEMPERATURE
Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot
or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.
NOTE
Oven temperature adjustments made will not change the
To adjust the oven temperature
1.Press BAKE.
2.Set the temperature to 550°F (287°C) by pressing and holding the 
.
3.Within 2 seconds, press and hold BAKE until the 2 digit display appears. Release BAKE. The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read “0”.
4.The temperature can now be adjusted up or down 35°F or 19°C, in 5°F or 1°C steps by pressing and holding
the 
or 
. Adjust until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign
5.When you have made the desired adjustment, press CLEAR Off to go back to the time of day display.
OVEN LIGHT
The oven is equipped with 2 oven lights. The oven lights will turn on automatically, when the oven door is opened.
The oven light may be turned on when the door is closed by using the oven light pad located on the control panel. The oven light key will toggle the lights at full intensity.
To toggle the Oven Lights ON and OFF:
1.Press OVEN LIGHT 
.
The interior oven lights are covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.
To change the interior oven lights, see “Changing the oven light” in the Care & Cleaning section.
18