7Using Headphones Displaying Source Information

Basic Operations—Continued

7Using Headphones	Displaying Source Information
For private listening, you can connect a pair of stereo	You can display various information about the current
headphones (1/4-inch phone plug) to the AV receiver’s	input source as follows.
PHONES jack.
	Press the [RECEIVER] button,
	and then press the [DISPLAY]
	button repeatedly to cycle
	through the available
	information.

Notes:

•Always turn down the volume before connecting your headphones.

•While the headphones plug is inserted in the PHONES jack, the speakers are turned off.

•Speaker sets A and B are turned off while the headphones plug is inserted in the PHONES jack.

•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Mono, Stereo, or Direct, in which case it stays the same.

Note:

This procedure can also be performed on the AV receiver by using its [DISPLAY] button.

The following information can typically be displayed:

Input source & volume*1

Signal format*2 or sampling frequency

Adjusting the Bass & Treble

You can adjust the bass or treble for speaker set A’s front speakers, except when the Direct listening mode is selected.

AV receiver Press the [TONE] button repeatedly to select either “Bass” or “Treble”.

Use the TONE [–]/[+] buttons to adjust.

Tip:

This procedure can also be performed on the remote controller by using [AUDIO] button (see page 76).

■Bass

You can boost or cut low-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.

■Treble

You can boost or cut high-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.

Input source & listening mode

*1 When AM or FM radio is used, the band, preset number, and frequency are displayed.

*2 If the input signal is analog, or AM or FM radio is selected, no format information is displayed. If the input signal is PCM, the sampling frequency is displayed. If the input signal is digital but not PCM, the signal format is displayed. Information is displayed for about 3 seconds, then the previous display reappears.

Interpreting Surround Channel Information

AB C

A:The number of front channels (front left, front right, and center).

B:The number of surround channels (surround left and surround right).

C:LFE channel for subwoofer (1 means yes).

HT-S5200 specifications

The Onkyo HT-S5200 is a remarkable home theater system that offers an impressive blend of features, technology, and sound quality, making it an excellent choice for both audio enthusiasts and casual movie watchers alike. This 5.1 channel surround sound system is designed to provide an immersive audio experience, perfect for enhancing your favorite films, music, and video games.

At the heart of the HT-S5200 is the powerful 3D surround sound processing, which utilizes Dolby TrueHD and DTS-HD Master Audio formats. These technologies ensure that you experience high-definition audio that is crystal clear and richly detailed. Whether you're engrossed in an action-packed blockbuster or a heartfelt drama, the system delivers sound that transports you right into the action.

One standout feature of the HT-S5200 is its advanced 6.1-channel input, allowing for Dolby Digital and DTS surround sound processing. This enables the system to decode a wide range of audio formats, providing versatility for various media sources. The system is also equipped with multiple HDMI inputs, making it easy to connect all your favorite devices, from Blu-ray players to gaming consoles, ensuring a clutter-free setup.

The system comes with a well-designed 5.1 speaker configuration, which includes a subwoofer that delivers deep bass, enhancing your listening experience. The compact design of the satellite speakers makes them easy to integrate into any room, while still producing powerful sound that fills the space.

Another impressive aspect of the Onkyo HT-S5200 is its user-friendly interface, which includes an easy-to-navigate remote control and an intuitive on-screen display. This makes it simple to adjust settings and choose different audio modes, ensuring you get the most out of your home theater experience.

The HT-S5200 also features a variety of connectivity options, including Bluetooth, which allows for seamless streaming of music from your smartphone or tablet. This feature adds modern convenience to the system, enabling users to enjoy their favorite playlists without the hassle of cables.

In conclusion, the Onkyo HT-S5200 home theater system stands out as a powerful and versatile choice for anyone looking to elevate their home entertainment setup. With its advanced audio technologies, user-friendly design, and impressive sound performance, it promises to deliver a captivating surround sound experience that is sure to impress.

Onkyo HT-S5200 7Using Headphones Displaying Source Information, Adjusting the Bass & Treble

Models: HT-S5200

Basic Operations—Continued