Onkyo HT-S5200 instruction manual Displaying Sirius Satellite Radio Information, Deleting Presets

Listening to SIRIUS Satellite Radio—Continued

■ Deleting Presets

1	Select the preset that you want to
	delete.
	See the previous section.
2AV receiver	While holding down the
	[MEMORY] button, press the
	[TUNING MODE] button.
	The preset is deleted and its number
	disappears from the display.

Displaying SIRIUS Satellite Radio Information

Press the [DISPLAY] button repeatedly to cycle through the available information.

Channel name

Channel number

Channel number & preset number

Preset number

Category

Artist/Composer name

Song title

Listening mode

Note:

If the category, artist, or song title is not available, “- - -” will be displayed instead.

■SIRIUS Satellite Radio Messages

The following messages may appear while using SIRIUS Satellite Radio.

ACQUIRING

The SiriusConnect receiver is acquiring the signal or no signal is present. Make sure the SiriusConnect Home tuner is connected properly and that there are no obstacles close by.

ANTENNA ERROR

Make sure the SiriusConnect Home tuner is connected properly.

SUB UPDATED

Displayed while your subscription is being updated. No operations can be performed until this message has cleared.

UPDATING XXX%

Displayed while the channel map is being updated. Wait until the updating is complete.

SIRIUS UPDATING

Displayed while the SiriusConnect receiver’s firmware is being updated.

INVALID CHANNEL

Displayed if you select an unavailable channel.

CALL SIRIUS

Displayed when you select a channel to which you are not subscribed. Call SIRIUS if you want to subscribe.

CHECK SR TUNER

Displayed if the SiriusConnect receiver is not connected. Make sure the SiriusConnect receiver is connected properly, and make sure its AC adapter is plugged in.

RECEIVER

ENTER

/ / /

SETUP

Positioning the SiriusConnect Home Tuner

You can check the signal strength of the SIRIUS Satellite Radio signal and adjust the position of the SiriusConnect Home antenna accordingly.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

57