2.Scroll up/down through the configuring options by short pressing the PTT button, until the screen shows the image below:
The current scramble setting will blink.
3.Select the desired scramble value (0,1,2 or 3) by pressing the 
/
buttons.
4.Long press the PTT button to save and exit,
Side Button Preset to Channel Select
Any channel can be mapped to either button B or C as a preset channel.
To map a channel to a side button:
1.Enter “Advanced Configuration Mode” and choose the channel to be preset using the
/ 
buttons.
2.Press and hold the B or C button
for 2 to 3 seconds. A short press of either preset button (B and C) will play a good key chirp.
Note: When scanning, a short press of either preset button will change the home channel to the preset channel. The display will show FREQ/PL and will continue to scan from the new home channel.
ADVANCED CONFIGURATION
43English
