Motorola RDM2020, rdm2080d manual Signal Strength and Channel Busy Indicators RDM2080d Model

GETTING STARTED

Whenever the radio is set up in “Scan Mode” the LED will signal a fast red blink.

If there is transmission in another channel during this time, the radio will stay on the active channel and the transmission on the other channel will not be heard.

When the transmission is over in the active channel, the radio will wait for 5 seconds before resuming Scan again.

2.To scan a channel without Interference Eliminator Codes (CTCSS/DPL), set the code for the channels to ‘0’ in the CTCSS/DPL Advanced Configuration Mode.

Note: If Auto-Scan has been enabled for a particular channel, there is no need to press the SB2 to start scanning, as the radio will do it automatically.

SIGNAL STRENGTH AND CHANNEL BUSY INDICATORS (RDM2080d MODEL)

While receiving, the radio displays the strength

indicator icon and the LED blinks faster. The signal strength icon can change from one bar (weakest) to six bars (strongest) depending on the radio reception coverage. This can help determine when a radio is moving out of range.

Note: Obstacles that block the signal path may affect the strength of the incoming signal.

English 26