Motorola RDM2020, rdm2080d manual Radio Cloning, Cloning with a Multi-Unit Charger MUC

GETTING STARTED

RADIO CLONING

The RDM Series MURS Two-Way radio profiles from one radio (the “Source” radio) to a second radio (the “Target” radio) by using any one of these 3 methods:

•One Multi Unit Charger (optional accessory)

•Two Single Unit Chargers and a Radio-to- Radio cloning cable (optional accessory)

•the CPS (free software download)

Cloning with a Multi-Unit Charger (MUC)

The Source radio has to be in Pocket 1, 3 or 5 while the Source radio to be cloned has to be in Pockets 2, 4 or 6, matching in the MUCs pockets by pairs as follows: 1 and 2 or 3 and 4 or 5 and 6.

When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.

To clone radios with the MUC:

1.Turn ON the Target radio and place it into one of the MUC Target Pockets

2.Power the Source radio following the sequence below:

Long press the PTT button and SB2 simultaneously while turning the radio ON. Wait for 3 seconds before releasing the buttons until a distinctive audible tone is heard.

English 30