Motorola rdm2080d, RDM2020 manual Configuring Auto-Scan

7.Long press the PTT button to save changes and return to “Idle” Advanced Configuration Mode. Once in “Idle” Advanced Configuration Mode, LED indicator will start blinking a green heartbeat.

8.Long press the PTT button to exit Advanced Configuration Mode.

Configuring Auto-Scan

Auto-Scan is the last Advanced Configuration Mode and can be set to “ON” or “OFF” on a particular channel.

To set Auto-Scan to “ON”:

1.Enter Advanced Configuration Mode and select the desired channel.

2.Short press the PTT button six times to enter Auto-Scan Programming Selection Mode. The radio will signal beeps and will show the current Auto-Scan setting (refer to “Reading Auto-Scan Values” on page 47).

3.Short press the SB1 button to toggle ON/OFF the Auto-Scan feature in the channel. When ON radio LED will blink RED once. When OFF radio LED will blink ORANGE once.

ADVANCED CONFIGURATION

49English