Motorola rdm2080d, RDM2020 manual Other Advanced Configurations RDM2080d Model only Call Tone

OTHER ADVANCED CONFIGURATIONS (RDM2080d MODEL ONLY)

Call Tone

This feature sends an alert notification to other radios in the fleet prior to the transmission with the intent to grab the receiver’s attention so the transmission is not missed.

In order to configure this feature via the front panel, it must first be enabled via the CPS.

To configure call tones:

1.	Enter “Advanced Configuration Mode” and
	scroll through the menu options until the screen
	shows the image below:
	TONE
	The current call tone setting will be blinking. A
	call tone value (0,1,2 or 3) must be selected by
	pressing the	/	buttons. The call tone will
	pre-play before being selected.

2.Long press the PTT button to save and exit, --or-- short press the PTT button to configure

the next feature without saving.

Microphone Gain Level

The sensitivity of the microphone can be adjusted in both the radio’s microphone and the accessory’s microphone to fit different users or operating environments.

The Gain determines the microphone’s transmitted audio volume level for the receiving radio’s speaker.

To configure microphone gain level:

1.	Enter “Advanced Configuration Mode” and
	scroll through the options by short pressing the
	PTT button until the screen shows the image	ADVANCED CONFIGURATION
	The current microphone gain level setting will
	below:
	IMIC
	blink.

41 English