Motorola rdm2080d, RDM2020 manual Advanced Configuration

ADVANCED

CONFIGURATION

Advanced Configuration is an optional configuration mode that allows the customization of additional features via the front panel.

To establish a proper two-way communication, the Channel, Frequency, and Interference Eliminator Code must be the same on both radios, which will depend on the stored profile that has been pre configured on the radio.

ENTERING ADVANCED CONFIGURATION MODE

To enter Advanced Configuration Mode, press and hold both PTT and SB1 buttons simultaneously for 3 to 5 seconds while turning radio ON. The LED will start to blink green. The RDM2080d will also show the icon on the screen.

These features can be configured in Advanced Configuration Mode:

FREQUENCY SELECTION

Any of the preset MURS frequencies can be assigned to each channel. See "RDM Series MURS Frequency Chart" on page 50.

CTSS/DPL CODES

This feature also called Interference Eliminator Code, helps minimize interference by offering a choice of code combinations that filter out static, noise, and unwanted messages. See code table "CTCSS and PL/DPL Codes" on page 52 for specific code details.

AUTO SCAN

This feature enables to set a particular channel to automatically start scanning each time that channel is selected.

ADVANCED CONFIGURATION

39English