ADVANCED CONFIGURATION
Reading Frequency Values
The Frequency value is only one digit as RDM Series MURS
To read frequency values:
1.From “Idle” Advanced Configuration Mode, short press the PTT button to hear the first value (Refer to "Advanced Configuration (RDM2020 Model)" on page 44). This value corresponds to the frequency's first digit value.
1
Frequency |
|
|
| |||
|
|
| ||||
|
|
|
|
|
| |
| First |
|
|
| PTT | |
| Digit |
|
|
|
| |
|
|
|
|
| Long | |
|
|
|
|
| ||
PTT | Long | |||||
PTT | ||||||
PTT | ||||||
|
|
|
| |||
2.Short press the PTT button to read CTCSS/DPL values.
Reading CTCSS/DPL Values
When reading the values for CTCSS/PL Codes the radio signals the digit codes each time the PTT button is short pressed. The RDM Series have up to 213 codes available (Refer to "Frequency and Code Charts" on page 50).
The following is an example of the order in which the radio signals the “118” CTCSS/DPL code:
1 | 1 | 8 |
First |
| Third |
Digit |
| Digit |
Second Digit
To read CTCSS/DPL Values:
1.Short press the PTT button. The radio signals the first digit “1” .
English 46
