Onkyo HT-S5200 instruction manual Satellite, cable, set-top box, etc

Connecting the AV receiver—Continued

Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source

Hint!

With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV receiver, which is useful if your TV has no audio outputs.

Step 1: Video Connection

Choose a video connection that matches the video source ( A or B ), and then make the connection. You must connect the AV receiver to your TV with the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches the video source ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from the video source.

•To enjoy Dolby Digital and DTS, use connection or . (To record as well, use and , or and .)

Connection		AV receiver	Signal flow	Video source
	A	COMPONENT VIDEO IN 2 (CBL/SAT)	⇐	Component video output
		CBL/SAT IN V	⇐	Composite video output
	B
	a	CBL/SAT IN L/R	⇐	Analog audio L/R output
		DIGITAL IN COAXIAL 2 (CBL/SAT)	⇐	Digital coaxial output
	b
	c	DIGITAL IN OPTICAL 1 (TV/TAPE)	⇐	Digital optical output

c

b

Connect one or the other Connection must be

assigned (see page 42)

A

a B

L R

OPTICAL	COAXIAL	AUDIO	VIDEO		Y	PB	PR
OUT	OUT	OUT		OUT	COMPONENT VIDEO OUT

Satellite, cable, set-top box, etc.

32