3M 2250M-iD, 2273M-iD manual Cable Identification, Connection Diagrams

3. Connection Diagrams

Short: Red clip to Tip; Black clip to ring.

Figure 1

Cross: Red clip to the crossed conductor of one pair; Black clip to the crossed conductor of the other pair.

Figure 2

Ground: Red clip to the faulted conductor;

Black clip to ground.

Figure 3

Split: Red clip to Tip of Pair 1; Black clip to

Ring of Pair 1.

Figure 4

Verify Split: Red clip to good conductor of

Pair 1; Black clip to split conductor of Pair 2

Figure 5

B. Cable Identification

1. Transmitter Setup

1.Connect the 3M™ Dyna-Coupler to the Transmitter Output Jack [T-6] using the coupler cable.

Note: Cable Identification requires two 3M Dyna-Couplers: one at the Transmitter and one at the Receiver.

56 78-8130-6150-0 Rev G