Editing Templates | 3M 2250M-iD, 2273M-iD manual

15.Populate as many fields as possible from the drop-down list of common (compressed) terms available to conserve marker memory space, or choose UserEdit if a term is not found to meet the user's requirements. Select term by pressing the up/down arrows [SK] and press Locate/OK [5].

16.Navigate to the next field by pressing the left/right arrow [SK].

17.Press Modify [SK] to populate the highlighted field.

18.Populate additional fields, as needed, using the above procedure steps 16 and 17. Templates are limited to six Label and six Description fields (256 bits of data total).

19.When the template is complete, save the template by pressing Locate/OK [5].

B. Editing Templates

The operator can select an existing template and make changes to it in the same manner described in Creating Templates. The following save screen will be displayed.

Over Write: Saves all modifications that have been made to the original template.

Rename: Overwrites the old template with the new name and all modifications. Display will return to the template name field. Modify the name of the template and press Locate/OK [5] to save.

Save New: Creates a new template containing all information. Original template remains unchanged. Display will return to the template name field. Modify the name of the template and press Locate/OK [5] to save.

78-8130-6150-0 Rev G

45

Image 45

3M 2250M-iD, 2273M-iD manual Editing Templates

Contents

3M Dynatel Contents Rev G Rev G Rev G Intended Use Safety Information About This Manual Quick Start Transmitter Battery Installation Receiver Battery Installation Service and Accessories Cleaning 3M Dynatel Transmitter 2273 Keypad and Connector Definitions Maximum Transmitter Output Rechargeable Battery Dynatel 3M Dynatel Receiver 2250M Key Pad and Display Definitions 3M Dynatel Receiver 2273M Key Pad and Display Definitions Main Menu Menu Displays Rev G Rev G Setting the Receiver Clock Configuring The ReceiverSelect Depth Units Selecting a Language Menu 6 + More SK4 + Setup SK6 + More SK6d + Tone Freq SK6j Enabling/Disabling FrequenciesCreating User Defined Frequencies Selecting Locating Audio Filtering Power Frequency Interference Direct Connect Method Buried Cables And Pipes Transmitter Connections Rev G Dyna-Coupler Method Induction Method Non-Sweeping Passive Induction Mode Locating Passive Sweeps Sweeping Active Induction Mode Locating One-person Active Induction Mode Sweeps Transmitter Set-up Two-person Active Induction Mode Sweeps Locate/OK 5 + Cable/Pipe SK + Mode SK + DirNull SK Toggle Locate/OK 5 + Cable/Pipe SK + Mode SK + Dir Pk SK ToggleReceiver Modes Directional Peak Dir Pk Special Peak Spl Pk Locate/OK 5 + Cable/Pipe SK + Mode SK + Spl Pk SK Toggle Locate/OK 5 + Cable/Pipe SK + Mode SK + Ind Pk SK Toggle Expanded ModeDepth and Current Estimate Induction Peak Ind Pk Active Frequencies Locating Frequencies Power Frequencies Passive FrequenciesAuxiliary Frequencies Locating in Directional Peak Mode Rev G Determining ADP Depth Locating Active Duct Probes Sondes Transmitter Setup Locating Buried Sheath Faults and Earth Return Faults Pinpointing the Buried Fault Green Band Alert Mode Locating 3M Electronic Markers 3M iD MarkersEnabling/Disabling Marker Types Press Locate/OK Single Marker Locate 3M iD Marker Depth Dual Marker Locate Passive 3M Electronic Marker Non-iD Depth Creating/Editing Templates for 3M iD Markers Creating New TemplatesMenu 6 + Data/Templat SK2 + User Templat SK2c Rev G Editing Templates Writing 3M iD Markers Menu 6 + Write Mode SK1 Press Start Write SK Modifying Marker Data to be Written Press Menu 6 + Write Mode SK1 Rev G Reading 3M iD Markers Reviewing Marker Read/Write History Read HistoryMenu 6 + Data/Templat SK2 + Read History SK2a GPS Operation Capturing the GPS Coordinates Capture Mode / ModeWrite History SK Communicating with the GPS Device Path Mapping with GPS Menu 6 + COM Setup SK3 + GIS Menu 6 + Com SK3 + GIS SK or PDA SK Creating Trace Templates Additional Applications Aerial Faults Toning Cable Identification Connection Diagrams Menu 6 + More SK4 + Help SK8 Help Mode Menu 6 + More SK4 + Self Test SK7 Self Test Of Receiver Standard Configurations Product Description And Optional AccessoriesProduct Description Direct Connect Cables Earth Contact Frame Optional 3M Accessories for 3M Dynatel Locators Specification Receiver Specifications Detection Depth 3M Non-iD Passive Mode can display a fault resistance up to 10M Ω Transmitter Specifications Rechargeable Battery Information Environmental and Regulatory Specifications Rev G Important Notice Electrical Markets Division