Transmitter Specifications | 3M 2250M-iD, 2273M-iD specs

25. Transmitter Specifications

Item	Specification
Trace Mode	577 Hz
	8 kHz
	33 kHz
	200 kHz
Fault Mode	10/20 Hz - Fault signal
(2273M models only)	577 Hz / 33 kHz -Trace signal
	Note: The fault locating limit is 2.0MΩ although the transmitter's ohmmeter
	mode can display a fault resistance up to 10MΩ.
Tone Mode	577 Hz and 200 kHz pulsing at 8 Hz
Induction Mode	8 kHz (only available on 12 Watt Transmitter)
	33 kHz
	200 kHz
Output Power	3 Watt Transmitter Model
(in Direct Connect mode)	Normal setting: 0.5 W
	High setting: 3 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz
	5 Watt Transmitter Model
	Normal setting: 0.5 W
	High setting: 3 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz
	Maximum setting: 5 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz
	(with external DC power source)
	12 Watt Transmitter Model
	Normal setting: 0.5 W
	High setting: 3 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz
	Maximum setting: 12 W @ 577 Hz, 8 kHz; 10 W @ 33 kHz; 1 W @ 200 kHz
	(with external DC power source)
Output Voltage (Maximum)	70 Vrms
Output Protection	240 Vrms
Weight w/batteries	w/ alkaline batteries only: 5.2 lbs (2.4 kg)
	w/ rechargeable battery (2200RB) and alkaline batteries (5W and 12W
	transmitters only): 9.2 lbs (4.2 kg)
Battery Qty. and size	For Normal and High Output Power: 6 "C" size, Alkaline (LR14)
	For Maximum Output Power: Rechargeable Battery (2200RB), 12V-6AH,
	Sealed Maintenance-Free Lead (Pb)-Acid Battery
	(See safety information below.)
Battery Life	Normal Output Power level: 50 hours typical
	High Output Power level: 10 hours typical
	Typical transmitter specified battery life (listed above) is increased by 40%
	when using the 2200RB Rechargeable Battery (12 volt). Using the 2200RB
	bypasses the alkaline batteries.
	Maximum Output Power level: 4 hours typical (Maximum Output Power level
	achieved using 2200RB Rechargeable Battery.)
External DC Power	9–18 V DC
Rechargeable Battery fuse	5 Amp / 32 Volt
	Littelfuse MINI® Blade # 0297005
Cigarette Lighter Adapter	4 Amp / Fast Blow 250V
Cable fuse

78-8130-6150-0 Rev G

63

Image 63

3M 2250M-iD, 2273M-iD manual Transmitter Specifications, Mode can display a fault resistance up to 10M Ω

Contents

3M Dynatel Contents Rev G Rev G Rev G Intended Use Safety Information About This Manual Quick Start Transmitter Battery Installation Receiver Battery Installation Service and Accessories Cleaning 3M Dynatel Transmitter 2273 Keypad and Connector Definitions Maximum Transmitter Output Rechargeable Battery Dynatel 3M Dynatel Receiver 2250M Key Pad and Display Definitions 3M Dynatel Receiver 2273M Key Pad and Display Definitions Main Menu Menu Displays Rev G Rev G Selecting a Language Configuring The ReceiverSetting the Receiver Clock Select Depth Units Menu 6 + More SK4 + Setup SK6 + More SK6d + Tone Freq SK6j Enabling/Disabling FrequenciesCreating User Defined Frequencies Selecting Locating Audio Filtering Power Frequency Interference Direct Connect Method Buried Cables And Pipes Transmitter Connections Rev G Dyna-Coupler Method Induction Method Non-Sweeping Passive Induction Mode Locating Passive Sweeps Sweeping Active Induction Mode Locating One-person Active Induction Mode Sweeps Transmitter Set-up Two-person Active Induction Mode Sweeps Directional Peak Dir Pk Locate/OK 5 + Cable/Pipe SK + Mode SK + Dir Pk SK ToggleLocate/OK 5 + Cable/Pipe SK + Mode SK + DirNull SK Toggle Receiver Modes Special Peak Spl Pk Locate/OK 5 + Cable/Pipe SK + Mode SK + Spl Pk SK Toggle Induction Peak Ind Pk Expanded ModeLocate/OK 5 + Cable/Pipe SK + Mode SK + Ind Pk SK Toggle Depth and Current Estimate Active Frequencies Locating Frequencies Power Frequencies Passive FrequenciesAuxiliary Frequencies Locating in Directional Peak Mode Rev G Determining ADP Depth Locating Active Duct Probes Sondes Transmitter Setup Locating Buried Sheath Faults and Earth Return Faults Pinpointing the Buried Fault Green Band Alert Mode Locating 3M Electronic Markers 3M iD MarkersEnabling/Disabling Marker Types Press Locate/OK Single Marker Locate 3M iD Marker Depth Dual Marker Locate Passive 3M Electronic Marker Non-iD Depth Creating/Editing Templates for 3M iD Markers Creating New TemplatesMenu 6 + Data/Templat SK2 + User Templat SK2c Rev G Editing Templates Writing 3M iD Markers Menu 6 + Write Mode SK1 Press Start Write SK Modifying Marker Data to be Written Press Menu 6 + Write Mode SK1 Rev G Reading 3M iD Markers Reviewing Marker Read/Write History Read HistoryMenu 6 + Data/Templat SK2 + Read History SK2a Communicating with the GPS Device Capturing the GPS Coordinates Capture Mode / ModeGPS Operation Write History SK Path Mapping with GPS Menu 6 + COM Setup SK3 + GIS Menu 6 + Com SK3 + GIS SK or PDA SK Creating Trace Templates Additional Applications Aerial Faults Toning Cable Identification Connection Diagrams Menu 6 + More SK4 + Help SK8 Help Mode Menu 6 + More SK4 + Self Test SK7 Self Test Of Receiver Direct Connect Cables Earth Contact Frame Product Description And Optional AccessoriesStandard Configurations Product Description Optional 3M Accessories for 3M Dynatel Locators Specification Receiver Specifications Detection Depth 3M Non-iD Passive Mode can display a fault resistance up to 10M Ω Transmitter Specifications Rechargeable Battery Information Environmental and Regulatory Specifications Rev G Important Notice Electrical Markets Division