Onkyo HT-S5200 instruction manual Parental Lock

Models: HT-S5200

1 92
Download 92 pages 46.47 Kb
Page 58
Image 58

Listening to SIRIUS Satellite Radio—Continued

2 Use the Up and Down [q]/[w] buttons to select “9. Antenna Aim,” and then press [ENTER].

Note:

If the “SATRadio” is set to “None” (see page 53), the “Antenna Aim” item is not available.

3

Adjust the position of the

 

 

indoor/outdoor antenna

 

connected to the SiriusConnect

 

receiver so that the satellite

 

(SAT) signal strength bar is as

 

long as possible.

 

 

 

 

 

 

 

 

 

If you cannot receive a satellite signal,

 

press the Down [w] button to display

 

the terrestrial (TER) signal strength

 

meter and adjust your antenna so that

 

the bar is as long as possible.

 

Terrestrial signals are only available in

 

certain areas.

 

 

 

 

 

 

 

So long as the signal strength is good,

 

you can enjoy SIRIUS Satellite Radio

 

by using either satellite or terrestrial

 

reception.

 

 

 

 

Parental Lock

You can lock out channels that you do not want to receive.

1

Press the [RECEIVER] button,

 

 

followed by the [SETUP] button.

2 Use the Up and Down [q]/[w] buttons to select “10. Parental Lock”, and then press [ENTER]. “Enter : <0>” appears on the display.

 

Note:

 

If the “SATRadio” is set to “None” (see

 

page 53), the “ParentalLock” item is

 

not available.

3

Use the Left and Right [e]/[r]

 

buttons to change the number

 

displayed between the angle

 

brackets < >, and then press

 

[ENTER]. Repeat this for each

 

digit in the PIN number.*

4

Use the Up and Down [q]/[w]

buttons to select the channel that you want to lock out, for example:

5 Press the Left and Right [e]/[r] buttons so that an asterisk appears next to the name, as shown below, and then press [ENTER].

The message “Locked” will appear on the display.

6

Press the [SETUP] button.

 

 

Setup closes.

*The default number is “0000.” If you want to change the default setting, see “Changing the PIN Number” on page 59.

To unlock a previously locked channel, select the locked channel (see step 1–4), press the Left and Right [e]/[r] buttons so that the asterisk disappears (see step 5), and then press [ENTER]. The message “Unlocked” will appear on the display.

58

Page 58
Image 58
Onkyo HT-S5200 instruction manual Parental Lock