Onkyo HT-S5200 Listening to the Radio, AM/FM Frequency Step Setup, Buttons to select 8.Hardware

Listening to the Radio

AM/FM Frequency Step Setup

RECEIVER

qwer

ENTER

SETUP

For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

2	Use the Up and Down [q]/[w]
	buttons to select “8.Hardware”,

and then press [ENTER].

3	Use the Up and Down [q]/[w]
	buttons to select “FM/AM”.

4 Use the Left and Right [e]/[r]

buttons to select: 200k/10k:

Select if 200k/10k steps are used in your area.

50k/9k: Select if 50k/9k steps are used in your area.

5	Press the [SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

48