Onkyo HT-S5200 instruction manual Turning On the AV receiver, Turning On and Standby

Turning On the AV receiver

ON/STANDBY

STANDBY indicator	ON/STANDBY
	RECEIVER

Turning On and Standby

AV receiver	Remote
	controller

or

On the AV receiver, press the [ON/STANDBY] button.

On the remote controller, press the [RECEIVER] button, followed by the [ON/STANDBY] button.

The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.

To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller’s [ON/STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises the next time you turn on the AV receiver, turn down the volume before you turn it off.

Up and Running in a Few Easy Steps

To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once.

■ Do the 2EQ Room Correction and Speaker Setup—this is essential!

See “Audyssey 2EQ™ Room Correction and Speaker Setup” on page 39.

■Did you connect a component to component video input or digital audio input?

If you did, see “Component Video Input Setup” on page 42, or “Digital Input Setup” on page 42 respectively.

■Did you connect an Onkyo MD recorder or CD recorder?

If you did, see “Changing the Input Display” on page 43.

Y

CBPB COAXIAL

CRPR OPTICAL

OUT IN

TV/TAPEMD recorder, CD recorder,

RI Dock

38