Frigidaire FPCS3085LF manual Minimum and Maximum Control PAD Settings, Setting the Clock

Page 20

SETTING OVEN CONTROLS

MINIMUM AND MAXIMUM CONTROL PAD SETTINGS

All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds).

An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature.

FEATURE

 

MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME

PREHEAT

 

170°F/77°C

550°F/288°C

BAKE

 

170°F/77°C

550°F/288°C

BROIL

 

400°F/205°C

550°F/288°C

CONVECTION BAKE

 

170°F/77°C

550°F/288°C

CONVECTION ROAST

 

170°F/77°C

550°F/288°C

CONVECTION BROIL

 

400°F/205°C

550°F/288°C

PIZZA

 

170°F/77°C

550°F/288°C

CHICKEN NUGGETS

 

170°F/77°C

550°F/288°C

TIMER

12 Hr. Mode

0:01 Min.

11:59 Hr./Min.

 

24 Hr. Mode

0:01 Min.

11:59 Hr./Min.

CLOCK TIME

12 Hr. Mode

1:00 Hr./Min.

12:59 Hr./Min.

 

24 Hr. Mode

0:00 Hr./Min.

23:59 Hr./Min.

DELAY START

12 Hr. Mode

1:00 Hr./Min.

12:59 Hr./Min.

 

24 Hr. Mode

0:00 Hr./Min.

23:59 Hr./Min.

BAKE TIME

12 Hr. Mode

0:01 Min.

5:59 Hr./Min.

 

24 Hr. Mode

0:01 Min.

5:59 Hr./Min.

SELF CLEAN TIME

 

2 hours

4 hours

SETTING THE CLOCK

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press SET CLOCK. “CLO” will appear in the display.

2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.

3.Press START. “CLO” will disappear and the clock will start.

CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY

1.Press and hold SET CLOCK for 6 seconds. “CLO” will appear in the display.

2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.

3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.

4.Press START to accept the change or press CANCEL to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents
Use &Care Please Carefully Read and Save These Instructions Welcome & CongratulationsRegister Your Product Important Safety Instructions DefinitionsImportant Instructions for Using Your Cooktop For Glass Cooktop only Important Safety Instructions for Using Your OvenImportant Safety Instructions for Cleaning Your Oven Features AT a Glance Your Built-in Range FeaturesBefore Setting Surface Controls Cooktop on & Element on indicator lightsAbout the ceramic glass cooktop About the radiant surface elementsUsing proper cookware with radiant elements Cookware material types for radiant elementsAlso remember to Cookware recommendations for inductions elementsSelecting surface cooking cookware for induction elements Operational Noise Use the correct cookware type for induction elementsUse the correct cookware size for induction elements Available Esec display settings Power Boost Indicator Message PbPower failure indicator message PF Hot element indicator message HETo Operate the Single Radiant Surface Elements Setting Radiant Surface ControlsSingle radiant surface element Bridge surface radiant element To Operate the Bridge Surface ElementTo Operate the Induction Surface Elements Setting Induction Surface ControlsOperating the induction surface elements Setting Warm Zone Controls Keep warm zone Before Setting Oven Controls Oven vent location Air circulation in the oven Arranging oven racksTypes of oven racks Never pick up hot oven rack parts Effortless oven rack systemTo assemble the Effortless Oven Rack system Setting Oven Controls Control PAD FeaturesTemperature Visual Display Function follow later in this Use & Care GuideMinimum and Maximum Control PAD Settings Setting the ClockFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Changing Between 12 or 24 Hour Time of DAY DisplaySetting Silent Control Operation Setting Continuous Bake or 6 Hour Energy SavingSetting Temperature Display Fahrenheit or Celsius Setting Lockout Feature Setting Minute TimerSetting ADD 1 Minute Feature Setting Powerplustm Preheat Setting BakeTo set the Preheat temperature for 375F To set the Bake Temperature to 375FBenefits of Convection Bake Setting Convection BakeConvection Baking Tips Setting Convection Convert Setting Convection RoastTo set a Convection Roast Temperature of 375F Convection Roasting TipsSetting Convection Broil To set a Convection Broil Temperature of 500FConvection Broiling Tips Electric Oven Convection Broiling Table RecommendationsSetting Bake Time Setting Delay StartBAKE, Convection BAKE, Bake Time and Delay Press Delay StartSetting Keep Warm Setting PizzaDelayed Bake Time CancelSetting Chicken Nuggets Setting MY FavoriteSetting Broil Broiling TipsElectric Oven Broiling Table Recommendations To set a Broil of 500FSetting Oven Controls Adjusting Oven Temperature To adjust the oven temperature higherTo adjust the oven temperature lower Oven LightWhat to Expect during Cleaning Self-cleaningAdhere to the following cleaning precautions Stopping or Interrupting a Self-Cleaning Cycle Setting SELF-CLEAN Cycle Time LengthWhen the Self-Clean Cycle is Completed Keep warm drawer temperature selection Keep warm drawer rack positionsOperating the keep warm drawer To set the keep warm drawer controlsCare & Cleaning Cleaning Chart Cleaning various parts of your applianceCare & Cleaning Ceramic glass cooktop cleaning & maintenanceCleaning recommendations for the ceramic glass cooktop For light to moderate soilCare and cleaning of stainless steel Removing and replacing the lift-off oven doorAluminum utensils To Remove Oven DoorTo remove the hidden bake cover some models Changing oven lightBe Sure Oven is Cool To Replace the Light BulbTo remove and replace keep warm drawer some models Oven baking Occurrence Possible CAUSE/SOLUTION Self-cleaning cycle Soil not completely removed after self- cleaning cycleDrip bowls turning Color or distortedDisclaimer of Implies Warranties Limitation of Remedies Major Appliance WarrantyExclusions This warranty does not cover the following
Top Page Image Contents