Frigidaire FPCS3085LF manual Setting Continuous Bake or 6 Hour Energy Saving

Page 21

SETTING CONTINUOUS BAKE OR 6 HOUR ENERGY SAVING

The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear in the display and the control will beep once.

2.Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for the 6 Hour Energy Saving mode and “StAY On” indicates the control is set for the Continuous Bake feature.

3.Press START to accept the change (display will return to time of day) or press CANCEL to reject the change.

SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:

The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “FAhrnht” appears, the display is set to show temperatures in Fahrenheit. If “CELSIUS” appears, the display is set to show temperatures in Celsius.

2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “FAhrnht” or “CELSIUS”.

3.Press START to accept the change or press CANCEL to reject the change.

SETTING OVEN CONTROLS

SETTING SILENT CONTROL OPERATION

The DELAY START and SELF CLEAN pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press and hold DELAY START. “----” will appear and “DELAY” will flash in the display. After 6 seconds “bEEP On” or “bEEP OFF” will appear in the display.

2.Press SELF CLEAN to switch between normal sound operation and silent operation mode. The display will show either “bEEP On” or “bEEP OFF”.

Note: If “bEEP On” appears, the control will operate with normal sounds and beeps. If “bEEP OFF” appears, the control is in the silent operation mode.

3.Press START to accept the change or press CANCEL to reject the change.

Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents
Use &Care Welcome & Congratulations Register Your ProductPlease Carefully Read and Save These Instructions Definitions Important Safety InstructionsImportant Instructions for Using Your Cooktop Important Safety Instructions for Using Your Oven Important Safety Instructions for Cleaning Your OvenFor Glass Cooktop only Your Built-in Range Features Features AT a GlanceCooktop on & Element on indicator lights Before Setting Surface ControlsAbout the ceramic glass cooktop About the radiant surface elementsCookware material types for radiant elements Using proper cookware with radiant elementsCookware recommendations for inductions elements Selecting surface cooking cookware for induction elementsAlso remember to Use the correct cookware type for induction elements Use the correct cookware size for induction elementsOperational Noise Power Boost Indicator Message Pb Available Esec display settingsPower failure indicator message PF Hot element indicator message HESetting Radiant Surface Controls Single radiant surface elementTo Operate the Single Radiant Surface Elements To Operate the Bridge Surface Element Bridge surface radiant elementSetting Induction Surface Controls Operating the induction surface elementsTo Operate the Induction Surface Elements Keep warm zone Setting Warm Zone ControlsOven vent location Before Setting Oven ControlsAir circulation in the oven Arranging oven racks Types of oven racks Effortless oven rack system To assemble the Effortless Oven Rack systemNever pick up hot oven rack parts Control PAD Features Setting Oven ControlsTemperature Visual Display Function follow later in this Use & Care GuideSetting the Clock Minimum and Maximum Control PAD SettingsFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Changing Between 12 or 24 Hour Time of DAY DisplaySetting Continuous Bake or 6 Hour Energy Saving Setting Temperature Display Fahrenheit or CelsiusSetting Silent Control Operation Setting Minute Timer Setting ADD 1 Minute FeatureSetting Lockout Feature Setting Bake Setting Powerplustm PreheatTo set the Preheat temperature for 375F To set the Bake Temperature to 375FSetting Convection Bake Convection Baking TipsBenefits of Convection Bake Setting Convection Roast Setting Convection ConvertTo set a Convection Roast Temperature of 375F Convection Roasting TipsTo set a Convection Broil Temperature of 500F Setting Convection BroilConvection Broiling Tips Electric Oven Convection Broiling Table RecommendationsSetting Delay Start Setting Bake TimeBAKE, Convection BAKE, Bake Time and Delay Press Delay StartSetting Pizza Setting Keep WarmDelayed Bake Time CancelSetting MY Favorite Setting Chicken NuggetsBroiling Tips Setting BroilElectric Oven Broiling Table Recommendations To set a Broil of 500FSetting Oven Controls To adjust the oven temperature higher Adjusting Oven TemperatureTo adjust the oven temperature lower Oven LightSelf-cleaning Adhere to the following cleaning precautionsWhat to Expect during Cleaning Setting SELF-CLEAN Cycle Time Length When the Self-Clean Cycle is CompletedStopping or Interrupting a Self-Cleaning Cycle Keep warm drawer rack positions Keep warm drawer temperature selectionOperating the keep warm drawer To set the keep warm drawer controlsCleaning various parts of your appliance Care & Cleaning Cleaning ChartCeramic glass cooktop cleaning & maintenance Care & CleaningCleaning recommendations for the ceramic glass cooktop For light to moderate soilRemoving and replacing the lift-off oven door Care and cleaning of stainless steelAluminum utensils To Remove Oven DoorChanging oven light To remove the hidden bake cover some modelsBe Sure Oven is Cool To Replace the Light BulbTo remove and replace keep warm drawer some models Oven baking Occurrence Possible CAUSE/SOLUTION Soil not completely removed after self- cleaning cycle Self-cleaning cycleDrip bowls turning Color or distortedMajor Appliance Warranty Exclusions This warranty does not cover the followingDisclaimer of Implies Warranties Limitation of Remedies
Top Page Image Contents