GE EGR2002 Check Ignition of Surface Burners, Seal the Openings, Check Ignition of Oven Burner

Page 43

Installation Instructions

3ELECTRICAL CONNECTIONS (CONT.)

B.Usage Situations where Appliance Power Cord will be Disconnected Frequently.

Do not use an adapter plug in these situations because disconnecting of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. The customer should have the 2-prong wall receptacle replaced with a three-prong (grounding) receptacle by a qualified electrician before using the appliance.

The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes. In Canada, mobile home installation must be in accordance with the current CAN/CSA Z240/MH Mobile Home Installation Code.

Electric Disconnect

■Locate disconnect plug on the range back.

■Pinch sides of connector and pull out of range back.

5CHECK IGNITION OF SURFACE BURNERS

Operation of all cooktop and oven burners should be checked after the range and gas supply lines have been carefully checked for leaks.

Electric Ignition Models

Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a clicking sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burners should light within 4 seconds. After burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.

Quality of Flames

The combustion quality of burner flames needs to be determined visually.

(A) Yellow flames—

Call for service

(B) Yellow tips on outer cones— Normal for LP gas

(C) Soft blue flames—Normal for natural gas

If burner flames look like (A), call for service. Normal burner flames should look like (B) or (C), depending on the type of gas you use.

With LP gas, some yellow tipping on outer cones is normal.

4SEAL THE OPENINGS

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

6CHECK IGNITION OF OVEN BURNER

The oven is designed to operate quietly and automatically. To operate the oven, press the Bake pad and then press the number pads until 350° appears in the display. Touch the Start/On pad. After 30–90 seconds, the oven burner will ignite and burn until the set temperature is reached. The oven burner will continue to cycle on and off as necessary to maintain the oven at the temperature indicated by the display.

To check ignition of the broil burner, touch the Broil Hi/Lo pad and then the Start/On pad. After 30–90 seconds, the broil burner will ignite.

Electric ignition models require electrical power to operate. In case of a power outage, the oven burners on these models cannot be lit manually with a match. Gas will not flow unless the glow bar is hot.

If the oven is in use when a power outage occurs, the burner will shut off and cannot be re-lit until power is restored.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Write the model and serial numbers here Model # Serial # Ge.comWhat to do if YOU Smell GAS Ge.com Installation InstructionsSafety Precautions Instructions Surface BurnersCook Meat and Poultry THOROUGHLY… Operating Instructions Electric Warming Drawer on some modelsSealed Gas Burners Using the gas surface burnersHow to Select Flame Size Before Lighting a Gas BurnerTop-of-Range Cookware Case of Power FailureCare Using the oven controlsOven Temperature Knob on some models Oven Vent Before you begin…Aluminum Foil How to Set the Oven for Baking or RoastingPreheating and Pan Placement Troubleshooting Tips Consumer SupportHi Broil Using the ovenHow to Set the Oven for Broiling Broiling GuideTo Turn Off the Clock Display Using the clock and timer. on some modelsTo Set the Timer To Set the ClockTouch the Kitchen Timer On/Off pad twice To Reset the TimerTo Cancel the Timer Power OutageHow to Set a Delayed Start and Automatic Stop How to Set an Immediate Start and Automatic StopHour Shut-Off Special features of your oven control. on some modelsHow to Set for Regular Baking/Roasting Using the Sabbath Feature. on some modelsDesigned for use on the Jewish Sabbath and Holidays Operating Instructions Care and Cleaning Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat on some models To Adjust the Thermostat on models with an Oven Temp KnobOn Signal Light When Using the Warming DrawerTo Crisp Stale Items Temperature Selection ChartBefore a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning To Stop a Clean Cycle on some models How to Delay the Start of Cleaning on some modelsAfter a Clean Cycle on some models Standard Twin Burner Assemblies on some models Care and cleaning of the rangeInstructions Burner caps Burner Caps and HeadsCooktop Surface Burner GratesStainless Steel Surfaces on some models Lift-Off Oven Door To clean the inside of the doorOven Bottom Removable Kick Panel on some models Removable Storage Drawer on some models Safety InstructionsRemovable Warming Drawer on some models Lower Control Panel Front Manifold Panel and Knobs Oven Air VentsTo raise the cooktop To replace cover Oven Light ReplacementOven Shelves Do not remove any screws to remove the coverMaterials YOU MAY Need For Your SafetyPart Included Tools YOU will NeedInstallation Instructions Dimensions and Clearances Location ANTI-TIP DeviceProvide Adequate GAS Supply Connect the Range to GASInstallation Instructions Rigid Pipe Hookup Options Pressure regulator Manifold pipe Electrical Requirements Electrical ConnectionsSeal the Openings Check Ignition of Surface BurnersCheck Ignition of Oven Burner To remove the oven bottom Leveling the RangeWhen ALL Hookups are Completed Installing the ANTI-TIP DeviceBefore you call for service… Oven temperature See the Using the clock and timer sectionSee the Care and cleaning of the range section See the Installation of the range sectionWhen trying to set a After a clean cycle Oven not clean afterClean cycle Self clean light onUnable to get Power outageDisplay goes blank Display flashesCare and Cleaning We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Looking For Something More? AccessoriesWhat GE Will Not Cover GE Will ReplaceOne Year Mabe Will Replace Care and CleaningWhat Mabe Will Not Cover Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website
Top Page Image Contents