Instructions
Using the self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work properly.
Operating Instructions Safety
How to Delay the Start of Cleaning
Make sure the clock shows the correct time of day.
Touch the SELF CLEAN pad.
Using the number pads, enter the desired clean time.
Touch the DELAY START pad. The earliest start time you can set will appear in the display.
Using the number pads, enter the time of day you want the clean cycle to start.
Touch the START pad.
The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED door light goes off.
When the LOCKED door light is off, open the door.
Consumer Support Troubleshooting Tips Care and Cleaning
After a Clean Cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap- filled steel wool pad and rinse thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
■While the oven is
■If the shelves become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.
26