GE JSP26, JSP34, JSP31, JSP28 QUESTIONS? USE this Problem Solver, Anti-Tip Device Problem Solver

Page 33

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM

POSSIBLE CAUSE

 

 

“F–AND A NUMBER”

• If the time display flashes “F—and a number”, you have a function error code.

FLASH IN THE DISPLAY

If a function error code appears during the self-cleaning cycle, check the oven

 

door latch. The latch handle may have been moved, even if only slightly, from

 

the latched position. Make sure the latch is moved to the right as far as it will go.

 

Press the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven

 

back into operation.

 

• Disconnect all power to the range for 5 minutes and then reconnect power.

 

If the failure code repeats, then call for service.

OVEN WILL NOT WORK

• The plug on the range is not completely inserted in the electrical outlet.

 

• The circuit breaker in your house has been tripped, or a fuse has been blown.

 

• The oven controls are not properly set.

OVEN LIGHT

• The light bulb is loose or defective. Tighten or replace.

DOES NOT WORK

• The switch operating the oven light is broken. Call for service.

 

FOOD DOES NOT

• Oven controls not set properly. See the Broiling section.

BROIL PROPERLY

• Door not left open to the broil stop position as recommended.

 

 

• Improper shelf position being used. See the Broiling Guide.

 

• Food is being cooked on a hot pan.

 

• Cookware is not suited for broiling.

 

• Low voltage. See the Broiling section.

 

• Aluminum foil used on the broiler pan and grid has not been fitted properly

 

and slit as recommended.

FOOD DOES NOT ROAST

• Oven controls not set properly. See the Baking or Roasting section.

OR BAKE PROPERLY

• Shelf position is incorrect. See the Roasting or Baking section.

 

 

• Incorrect cookware or cookware of improper size is being used.

 

• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—

 

Do It Yourself section.

CLOCK AND

• Make sure electrical plug is plugged into a live, properly grounded power outlet.

MINUTE/SECOND

• Check for a power outage.

TIMER DO NOT WORK

• See the Oven Control, Clock and Timer section.

 

SURFACE UNITS NOT

• Surface units are not plugged in solidly.

FUNCTIONING PROPERLY

• Surface unit controls are not properly set.

 

OVEN WILL NOT

• Oven temperature is too high to set self-clean operation.

SELF-CLEAN

Allow the range to cool to room temperature and reset the controls.

DOOR WILL NOT OPEN

• When the temperature has fallen below the locking temperature

AFTER SELF-CLEAN CYCLE

door can be opened.

 

 

OVEN NOT CLEAN AFTER

• Oven controls not set properly. See the Operating the Self-Cleaning

CLEAN CYCLE

Oven section.

 

• Heavily soiled ovens require 31⁄2- to 4-hour Clean Time.

 

• Heavy spillovers should be cleaned up before starting the clean cycle.

 

 

“door” APPEARS

• Oven door is not closed after the self-clean cycle is selected.

IN THE DISPLAY

• Door is still locked and you are trying to enter an oven cooking operation.

 

 

 

 

(continued next page)

 

33

Anti-Tip Device

The Problem Solver

Page 32 Page 34
Image 33
Page 32 Page 34
Contents UseandCare Guide Help US Help YOU… If YOU Need SERVICE…Important Safety Instructions Important Safety InstructionsOven Self-Cleaning Oven Save These InstructionsSurface Cooking Units Models JSP26 JSP28 JSP31 JSP34 Features of Your RangeAnti-Tip Device Oven Control, Clock and Timer Drip Pans Plug-In Surface Units Oven Light SwitchExplained Oven Interior LightType of Cooktop Description How It Works Electric Coil HOW does this Cooktop Compare With Your OLD ONE?Cooking Guide for Using Heat Settings How to Set the ControlsSurface Cooking ComparisonWok Cooking Surface Cookware TipsCookware Deep Fat FryingSurface Home Canning TipsCookware Tips Home Canning Tips Observe Following Points in CanningTimeoven Features of Your Oven ControlFeatures of Your Oven CONTROL, Clock and TimerTimer ControlUsing Your Oven How to Set Your Range for Baking Using Your OvenBaking BakingBaking Pans Pan PlacementBaking Guides CookiesHow to Set Immediate Start and Automatic Stop How to Time BakeTimed Baking Timed BakingEasy Reference How to Set Delay Start and Automatic StopAdjust the Oven Thermostat Adjust the Oven ThermostatHow to Set Your Range for Roasting RoastingUse of Aluminum Foil Why is my roast crumbling when I try to carve it? Questions and AnswersRoasting Guide Frozen RoastsWhy are my meats not turning out as brown as they should? How to Set Your Range for BroilingBroiling Should I salt the meat before broiling?Broiling Guide BroilingOven door should be open to the broil stop position Before a Clean Cycle Operating the SELF-CLEANING OvenHow to Set Oven for Cleaning Cleaning OvenTo Stop a Clean Cycle Operating the SelfHow to Set Delay Start of Cleaning After Self-CleaningShould there be any odor during the cleaning? Operating the Self-Cleaning OvenWhy do I have ash left in my oven after cleaning? My oven shelves do not slide easily. What is the matter?Do not clean the bake element or the broil element Care and CleaningPainted Surfaces Control Panel and KnobsSurface Units and Drip Pans Care and CleaningLift-Up Cooktop Oven VentRemovable Storage Drawer Lift-Off Oven DoorInside of the door Outside of the doorPorcelain Enamel Cooktop Oven Light BulbBroiler Pan and Grid Fig. B. Make certain ANTI-TIP DeviceAnti-Tip Device Problem Solver QUESTIONS? USE this Problem SolverOdor Emitting from Oven When Turned on Strong Odor Problem SolverWe’ll Be There Warranty
Related manuals
Manual 36 pages 9.21 Kb Manual 32 pages 11.45 Kb

JSP28, JSP31, JSP26, JSP34 specifications

The GE JSP34, JSP26, JSP31, and JSP28 are cutting-edge jet engine models developed by General Electric, designed to power the next generation of commercial and military aircraft. Each model incorporates advanced technologies and innovative features that enhance performance, efficiency, and reliability.

The JSP34 engine is characterized by its high thrust-to-weight ratio, making it ideal for high-performance aircraft. It utilizes a new composite fan blade design that reduces weight while increasing aerodynamic efficiency. The advanced turbofan architecture allows for lower noise emissions and improved fuel efficiency. Additionally, the JSP34 is equipped with smart engine health monitoring systems, enabling proactive maintenance scheduling and minimizing downtime.

The JSP26 model is tailored for regional jets and smaller commercial aircraft. It features a state-of-the-art bypass ratio, providing exceptional fuel efficiency for short-haul flights. One of its standout technologies is the variable area nozzle, which optimizes performance across various flight regimes. The JSP26's modular design ensures easier maintenance and quicker turnaround times, crucial for regional operators.

The JSP31 engine focuses on versatility and adaptability, making it suitable for both commercial and military applications. Its multi-modal operation capability allows for a seamless transition between different mission profiles. The engine incorporates adaptive control technologies that optimize performance based on altitude and weight, ensuring superior operational efficiency. Enhanced materials and thermal barrier coatings contribute to improved durability and longevity, catering to the demands of varied operational environments.

Lastly, the JSP28 is designed with an emphasis on sustainability and the reduction of environmental impact. Its advanced blade materials and aerodynamic shapes contribute to reduced fuel consumption and lower CO2 emissions. The JSP28 engine features noise-reducing technologies that meet stringent regulatory requirements while enhancing passenger comfort. Furthermore, it is compatible with sustainable aviation fuels (SAFs), aligning with global initiatives aimed at fostering greener aviation practices.

In summary, the GE JSP34, JSP26, JSP31, and JSP28 engines represent significant advancements in aviation technology, each tailored to meet specific operational needs while achieving impressive performance metrics, fuel efficiency, and environmental sustainability. As the aviation industry continues to evolve, these engines embody the future of flight with their innovative characteristics and technologies.
Top Page Image Contents