GEAppliances.com
QUESTIONS?
BEFORE YOU CALL FOR SERVICE…
PROBLEM | POSSIBLE CAUSE | |
|
| |
TOP BURNERS DO NOT | • Make sure electrical plug is plugged into a live power outlet. | |
LIGHT OR DO NOT | • Burner holes on the side or around the top of burner may be clogged. Remove | |
BURN EVENLY | ||
burners (on models with standard twin burners) or burner heads (on models with | ||
| ||
| sealed burners) or burner caps on | |
| sewing needle or | |
|
•Make sure the drip pans (on some models) are installed correctly.
•Pilot(s) is (are) not lit (on standing pilot models). See the Lighting Instructions for Standing Pilot Models in Surface Cooking.
BURNER FLAMES VERY | • If range is connected to LP gas, contact the person who installed your range | |||||
LARGE OR YELLOW | or made the conversion. |
|
| |||
|
|
|
|
|
|
|
SURFACE BURNERS | • The oven gas |
|
| |||
LIGHT BUT OVEN | cleaning or moving. |
|
| |||
DOES NOT | To check the oven gas | |||||
| ||||||
| the cooktop and look for the gas | |||||
| (Standing pilot models do not have a gas |
|
| |||
| Follow the directions in box A or B that match your regulator type. |
|
| |||
|
|
|
|
|
|
|
| A |
| B |
Lever shown closed. | Lever shown closed. | |
PULL TO OPEN. | ||
PULL TO OPEN. | ||
| ||
Standard Twin Burner Models | Standard Twin Burner Models |
To check the oven gas
Lever shown |
closed. PULL |
TO OPEN. |
Sealed Burner Models |
(continued next page)
43