GE RGA724, RGA720 owner manual ANTI-TIP Device, Location

Page 26

Installation Instructions

WARNING!

ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, install the Anti-Tip device packed with this range. (See Install the Anti-Tip Device in this section.) To check if the device is installed and engaged properly, carefully tip the range forward. The Anti-Tip device should engage and prevent the range from tipping over.

If you pull the range out from the wall for any reason, make sure the Anti-Tip device is engaged when you push the range back against the wall.

For your safety, never use your range for warming or heating the room. Your oven and cooktop are not designed to heat your kitchen. Top burners should not be operated without cookware on the grate. Such abuse could result in fire and damage to your range and will void your warranty.

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Explosions or fires could result.

Do not use oven for a storage area. Items stored in the oven can ignite.

Do not let cooking grease or other flammable materials accumulate in or near the range.

LOCATION

Do not locate the range where it may be subject to strong drafts. Any openings in the floor or wall behind the range should be sealed. Make sure the openings around the base of the range that supply fresh air for combustion and ventilation are not obstructed by carpeting or woodwork.

Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. Use care when moving the range on this type of flooring. It is recommended that the following simple and inexpensive instructions be followed to protect your floor.

The range should be installed on a sheet of plywood (or similar material). When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering.

This will allow the range to be moved for cleaning or servicing. Also, make sure your floor covering will withstand 180°F. (See the Installation Safety Instructions section.)

Make sure the wall coverings around your range can withstand the heat generated (up to 200°F) by the range. (See the Installation Safety Instructions section.)

MODEL AND SERIAL NUMBER LOCATION

You can find them on a label under the cooktop. See the Lift-Up Cooktop section in this manual or instructions on how to lift the cooktop.

IMPORTANT!

Remove all tape and packaging. Make sure the burners are properly seated and level.

Lift up the cooktop and remove any packing material under it.

Take the accessory pack out of the oven and/or drawer.

Check to be sure that no range parts have come loose during shipping.

26

Image 26
Contents 20″ and 24″ Compact Gas Ranges What to do if YOU Smell GAS Safety Instructions Operating Instructions Care Ge.comInstallation of the range section Cook Meat and Poultry THOROUGHLY… Surface Burners Installation Instructions Operating InstructionsInstructions Using the gas surface burnersInstallation Instructions Care and Cleaning Surface Lighting Instructions for Electric Ignition ModelsHow to Select Flame Size Instructions Operating Top of Range CookwareUsing the oven Type of margarine will affect baking performance Oven Shelf PositionsOven Vents Using the oven for baking Pies Cookies SafetyCare and Cleaning Don’t Peek CakesSafety Instructions Using the oven for roastingAdjust the oven thermostat-Easy to do yourself How to Set the Oven For RoastingBroiler Compartment Using the oven for broilingSafety Instructions How to Set Your Oven for Broiling Use of Aluminum FoilBroiling Guide CommentsBurner Grates Care and cleaning of the rangeLift-Up Cooktop Tips Consumer SupportControl Panel and Knobs Cleaning Operating Instructions SafetyBurners Oven Shelves and Broiler RackRemovable Oven Bottom Cleaning the Oven BottomCleaning Installation Instructions Broiler Compartment To removeTo remove the door Instructions Safety Broiler Pan and GridLift-Off Oven Door Inside of doorPorcelain Oven Interior Safety Painted SurfacesCommonwealth of Massachusetts Before YOU Begin Part Included For Your Safety Tools YOU will Need Materials YOU MAY NeedInstallation Safety Instructions Dimensions and Clearances 36″ANTI-TIP Device LocationConnect the Range to GAS Provide Adequate GAS SupplyHookup Example Flexible ConnectorRecommended GAS and Electric Supply Location Seal the Openings Light the PilotsIf the Range has Electric Ignition Adjust the Oven Burner AIR Shutter if NecessaryAdjust the Surface Burner Pilots if Necessary For Natural GasReplace Oven Parts If Adjustment is NecessaryQuality of Flames For LP Gas⁄ 8 ″ Install the ANTI-TIP DeviceLevel the Range Model and Serial Number Location When ALL Hookups are CompletedMobile Home Installation Before you call for service… Care and Cleaning Gas Range WarrantyWhat is Not Covered We Will ReplaceConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio