GE RGA720, RGA724 For Your Safety, Tools YOU will Need, Part Included, Materials YOU MAY Need

Installation Instructions

FOR YOUR SAFETY

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. If you smell gas:

1Open windows.

2Don’t touch electrical switches.

3Extinguish any open flame.

4Immediately call your gas supplier.

TOOLS YOU WILL NEED

Phillips screwdriver
	Open-end or
Flat-blade screwdriver	adjustable wrench
3/16″ or smaller

Pencil and ruler	Pipe wrenches (2)
	(one for backup)
Level	Drill, awl or nail
Pliers	5/16″ Nut driver

PART INCLUDED

Anti-tip bracket kit

MATERIALS YOU MAY NEED

•Gas line shut-off valve

•Pipe joint sealant or UL-approved pipe thread tape with Teflon* that resists action of natural and LP gases

•Flexible metal appliance connector (1/2″ I.D.) A 5-foot length is recommended for ease of installation but other lengths are acceptable. Never use an old connector when installing a new range.

•Flare union adapter for connection to gas supply line (3/4″ or 1/2″ NPT x 1/2″ I.D.).

•Flare union adapter for connection to pressure regulator on range (1/2″ NPT x 1/2″ I.D.)

•Liquid leak detector or soapy water.

•Lag bolt or 1/2″ O.D. sleeve anchor (for concrete floors only).

•Long matches and/or match holder (for models equipped with standing pilots).

*Teflon: Registered trademark of DuPont

23