Rotel RSX-1057 owner manual Unpacking, Placement, CD Inputs, Tape Inputs, Tape Outputs

Page 16

RSX-1057Surround Sound Receiver

Unpacking

Remove the unit carefully from its packing. Find the remote control and other acces- sories. Save the box as it will protect the RSX-1057 if you move or need to return it for maintenance.

Placement

Place the RSX-1057 on a solid, level surface away from sunlight, heat, moisture, or vibra- tion. Make sure that the shelf can support the weight of the unit.

Place the RSX-1057 close to the other compo- nents in your system and, if possible, on its own shelf. This will make initial hookup, and subsequent system changes easier.

The RSX-1057 can generate heat during nor- mal operation. Do not block ventilation open- ings. Allow a minimum of 10 cm or 4 inches of unobstructed space around the unit. If installed in a cabinet, make sure that there is adequate ventilation.

Don’t stack other components or objects on top of the RSX-1057. Don’t let any liquid fall into the unit.

16

CONNECTIONS

Although the RSX-1057’s rear panel looks daunting, connecting the unit to your system is straightforward. Each of the source com- ponents in the system are connected to the RSX-1057 inputs with a pair of standard RCA cables for analog audio, a video connection (Composite, S-Video, Component Video, and/or HDMI), and an optional digital au- dio cable (coax or optical).

NOTE: Surround formats like Dolby Digital and DTS are digital formats and the RSX-1057 can only decode them when a digital input sig- nal is available. For this reason, you should always connect your DVD player’s digital outputs to the RSX-1057, using either the op- tical or coax inputs.

The outputs of RSX-1057 are sent to up to five speakers or to optional power amplifier(s) with standard RCA cables from preamp audio outputs. The video signal from the RSX-1057 is sent to the TV monitor using Composite video, S-Video, Component Video, and/or HDMI connections.

In addition, the RSX-1057 has MULTI input connections for a source component that does its own surround decoding, remote IR sensor inputs, and 12V trigger connections for remote turn-on of other Rotel components.

NOTE: Do not plug any system component into an AC source until all connections have been properly made.

Video cables should have a 75 ohm imped- ance. The S/PDIF digital audio interface stan- dard also specifies a 75 ohm impedance and all good digital cables adhere to this require- ment. Do NOT substitute conventional audio interconnect cables for digital or video sig- nals. Standard audio interconnects will pass these signals, but their limited bandwidth re- duce performance.

When making signal connections, connect LEFT channels to LEFT channel jacks and RIGHT channels to RIGHT channel jacks. All RCA-type connections on the RSX-1057 fol- low these standard color codes:

Left channel audio: white RCA jack

Right channel audio: red RCA jack

Composite video: yellow RCA jack

NOTE: Each source input must be properly configured using the INPUT SETUP menu of the OSD menu system. We recommend go- ing to this menu after connecting each source to configure it as desired. See Input Setup of the Setup section for information.

Analog Audio Inputs & Outputs

The following connections are used for con- necting analog audio signals to and from the RSX-1057. See the Making Connections topic for specific instructions on connecting each type of component.

NOTE: Normally, the RSX-1057 converts ana- log inputs to digital signals. All of the digital processing is available including bass man- agement, digital crossovers, speaker level and delay settings, and a number surround mode options. Alternatively, there is an analog bypass surround mode that routes 2-ch and Multi Input analog signals directly to the Volume control and outputs, bypassing the digital processing entirely for pure analog stereo.

CD Inputs

A left/right pair of RCA analog audio inputs for connecting a CD player.

TAPE Inputs

A pair of RCA inputs, labeled TAPE IN, for connecting the left/right analog audio sig- nals from an audio tape deck or recording device.

TAPE Outputs

A pair of RCA inputs, labeled TAPE OUT, for sending left/right line level analog au- dio signals for recording on a tape deck or recording device.

NOTE: These outputs should be connected to the inputs of the same tape deck connected to the TAPE IN inputs.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RSX-1057 10 cm Cm 4 Important Safety Instructions FCC InformationControls and Connections English RR-1060 RemoteConnecting the Speakers Digital Video Connections TV Analog Connections DVD Player Analog Connections English VCR Analog Connections CD Player/CDR Recorder Connections Monitor OUT HdmiAudio Recorder Connections AM and FM Antennae ConnectionsOn-Screen Menus Contents Menu Basics SpecificationsAbout Rotel Key FeaturesGetting Started Placement UnpackingCD Inputs Tape InputsVideo 1-5 Audio Inputs Video 1-3 Audio OutputsMulti Inputs Speaker OutputsComposite Video Inputs Composite Video OutputsVideo 1-5 S-Video Inputs Video 1-3 S-Video OutputsDigital Audio Input & Outputs Other ConnectionsREM in Jacks Computer I/OCD Player Cable, Satellite, Hdtv TunerAudio Recorder VCR or Digital Video RecorderDVD-A or Sacd Player TV MonitorConnecting a Subwoofer Redirect FeatureSpeakers AmplifiersRSX-1057 Front Panel OverviewVolume Knob Volume Button Using the RR-1060 Audio ButtonStandby Button Power Button REC ButtonsBasic Operations Selecting Inputs Overview Surround Formats Dolby Surround Dolby Pro LogicDolby Digital DTS DTS 96/24DTS Neo6 Dolby Digital Surround EX7.1 Channel Surround Dolby Pro Logic 7.1 Channel SurroundManually Selecting Surround Modes Other Digital FormatsDolby Digital 5.1 discs Dolby Digital Surround EX discs Dolby Digital 2.0 discsDTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discs Mpeg Multichannel discsDigital Stereo discs PCM, MP3, and Hdcd On a 6.1/7.1 system with a DTSOther Settings Group DelayAnalog Stereo Speaker LevelContour/Tone Settings To adjust dynamic rangeTo adjust the contour settings from the remote Tuner ControlsNumeric Buttons Station Presets Memory ButtonDisp Button PTY ButtonTP Button TA ButtonZone 2 Power On/Off Zone 2 OperationControlling Zone 2 from the Main Room Controlling Zone 2 from the Remote LocationMenu Basics Navigation ButtonsSystem Status Main MenuInput Setup Configuring InputsMulti Input Setup Multi InputConfiguring Understanding Speaker Con- figurationSpeaker Setup Advance Speaker SetupSubwoofer Setup Subwoofer SetupTest Tone Delay SetupCalibration with an SPL meter Contour Setup Other OptionsZone 2 Setup Default SetupTroubleshooting Specifications Rotel Europe Rotel of AmericaRotel Deutschland

RSX-1057 specifications

The Rotel RSX-1057 is a robust and versatile AV receiver that has garnered attention for its excellent performance and range of features. Designed to meet the demands of home theater enthusiasts, it stands out for its combination of advanced technology, superior audio quality, and user-friendliness.

One of the key features of the RSX-1057 is its robust amplification capabilities. With a power output of 75 watts per channel, it can deliver rich sound across multiple audio channels, making it ideal for multi-channel audio setups. This is complemented by the receiver's high-current design, which ensures dynamic sound reproduction with minimal distortion, even at high volumes.

The receiver supports a wide range of audio formats, including Dolby Digital, Dolby Pro Logic II, DTS, and various music-enhancing technologies. This allows users to experience movies and music in immersive detail, making it a great choice for both film buffs and music lovers alike. The RSX-1057 also features an integrated AM/FM tuner, enabling users to enjoy their favorite radio stations without the need for additional equipment.

In terms of connectivity, the RSX-1057 boasts an impressive selection of input and output options. It includes several HDMI inputs, component video inputs, and composite video connections, making it highly compatible with a variety of devices, from Blu-ray players to gaming consoles. Furthermore, the receiver offers audio outputs that allow for easy integration with subwoofers, enhancing the overall audio experience.

One of the standout technologies in the RSX-1057 is its proprietary ‘Rotel Link’ feature, which enables multi-room audio setups. This function allows users to connect multiple components and create a unified audio system throughout their home. The intuitive remote control enhances the user experience, providing seamless access to browsing and selecting different inputs and settings.

The design of the Rotel RSX-1057 is both aesthetically pleasing and functional. Its sleek chassis features a brushed aluminum front panel, which not only looks great but also minimizes environmental interference. Furthermore, the unit is designed for efficient heat dissipation, ensuring longevity and reliable performance over time.

Overall, the Rotel RSX-1057 is a well-rounded AV receiver that excels in audio fidelity, versatility, and user-centric features. Its commitment to quality and innovation makes it a popular choice for anyone seeking to elevate their home entertainment experience.
Top Page Image Contents