Rotel RSX-1057 Volume Knob Volume Button, REC Buttons, Using the RR-1060 Audio Button, SLT Button

Page 24

RSX-1057Surround Sound Receiver

Many of the RR-1060 functions duplicate the front panel controls. For that reason, we cover the controls on the remote under appropriate topics throughout this manual. Letters in gray boxes next to the name of a function refers to the labeled illustration of the remote at the front of this manual.

24

VOLUME Knob

VOLUME Button

The large rocker button on the remote and the large rotary control on the front panel provide the master VOLUME control, adjust- ing the output level of all channels simulta- neously.

REC Buttons

Press either of these buttons before pressing (long press on the remote) any DEVICE/INPUT button to select a source for recording. The signal from the selected source appears at the TAPE OUT and VIDEO OUT connectors.

Using the RR-1060

AUDIO Button

To operate the RSX-1057 with the remote, make sure that the AUDIO mode is active by pressing the AUD button on the remote be- fore you start. If one of the other buttons (CD, TAPE, etc.) is pressed, the remote will control another component, not the RSX-1057. The AUDIO mode will stay active until another DEVICE/INPUT button is pressed.

Overview of Buttons and Controls

This section provides a basic overview of the buttons and controls on the front panel and the remote control. Detailed instructions on the use of these buttons a provided in the more complete operating instructions in the follow- ing sections. Buttons or controls identified with a number appear on the front panel. Those identified with a letter appear on the remote control. When both a number and a letter appear, the control is duplicated on both the front panel and the remote control.

STANDBY Button

POWER Button

The front panel STANDBY button and the re- mote control POWER button activate or deac- tivate the unit. The rear panel master POWER switch must be in the ON position for the re- mote standby function to operate.

ON/OFF Buttons

The power ON and OFF buttons on the remote provide discrete ON and OFF commands to activate the unit or put it in standby mode. The rear panel master POWER switch must be in the ON position for the remote standby function to operate.

MUTE Buttons

Push the MUTE button once to turn the sound off. An indication appears in the front panel and on-screen displays. Press the button again to restore previous volume levels.

NOTE: Pressing the volume buttons on the re- mote also cancels the muting function.

LIGHT Button

Press this button on the side of the remote to turn the backlighting on for using the remote in a dark room.

DEVICE/INPUT Buttons

The top row of buttons on the front panel plus the MULTI INPUT button are used to select source inputs for listening/viewing.

These buttons are duplicated on the remote, except that the MULTI INPUT button is la- beled EXT and the remote buttons have two functions:

Short press: A short press of any button changes the device that the remote oper- ates, but does not change the RSX-1057’s input selection.

Long press: A longer press changes the remote control device and changes the source input for listening/viewing in the main room.

NOTE: A long press of the EXT button changes the input to the 7.1 channel analog MULTI IN- PUT. Pressing the AUD button only changes the remote device; there is no input source associated with this button.

D-SLT Button

Press this button to change the digital input associated with the current source input.

ZONE Buttons

Press either of these buttons before pressing (long press on the remote) any DEVICE/INPUT button to select a source for ZONE 2.

UP/DOWN Buttons

These two buttons on the remote are used to move the cursor up or down to select lines in the OSD menus. These buttons are also used in conjunction with the TONE button to make CONTOUR/TONE adjustments.

+/– Buttons

These two buttons on the remote are used to change settings on a selected line in the OSD menus. Also used for selecting options in some surround modes.

Speaker Selection Buttons

These three buttons on the remote are used to select a speaker or group of speakers for temporary level adjustments. In addition, the C button is used in conjunction with the UP/ DOWN buttons for temporary adjustment of group delay/lip synch.

EQ Button

This button on the remote is used to turn on and off the Cinema EQ feature, a high-cut filter useful for older movie soundtracks.

TONE Button

This button on the remote is used for tempo- rary Contour adjustments. It toggles between high frequency (HF) and low frequency (LF) modes. Once a mode is selected, the UP/ DOWN buttons are used to make the adjust- ments to the speaker or speakers selected in the Contour Setup menu.

NOTE: Permanent contour adjustments can be made using the Contour Setup menu.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents RSX-1057 10 cm Cm 4 Important Safety Instructions FCC InformationControls and Connections English RR-1060 RemoteConnecting the Speakers Digital Video Connections TV Analog Connections DVD Player Analog Connections English VCR Analog Connections CD Player/CDR Recorder Connections Monitor OUT HdmiAudio Recorder Connections AM and FM Antennae ConnectionsOn-Screen Menus Contents Menu Basics SpecificationsKey Features About RotelGetting Started Placement UnpackingCD Inputs Tape InputsVideo 1-5 Audio Inputs Video 1-3 Audio OutputsMulti Inputs Speaker OutputsComposite Video Inputs Composite Video OutputsVideo 1-5 S-Video Inputs Video 1-3 S-Video OutputsDigital Audio Input & Outputs Other ConnectionsREM in Jacks Computer I/OCD Player Cable, Satellite, Hdtv TunerAudio Recorder VCR or Digital Video RecorderDVD-A or Sacd Player TV MonitorConnecting a Subwoofer Redirect FeatureSpeakers AmplifiersRSX-1057 Front Panel OverviewVolume Knob Volume Button Using the RR-1060 Audio ButtonStandby Button Power Button REC ButtonsBasic Operations Selecting Inputs Overview Surround Formats Dolby Surround Dolby Pro LogicDolby Digital DTS DTS 96/24DTS Neo6 Dolby Digital Surround EX7.1 Channel Surround Dolby Pro Logic 7.1 Channel SurroundManually Selecting Surround Modes Other Digital FormatsDolby Digital 5.1 discs Dolby Digital Surround EX discs Dolby Digital 2.0 discsDTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discs Mpeg Multichannel discsDigital Stereo discs PCM, MP3, and Hdcd On a 6.1/7.1 system with a DTSOther Settings Group DelayAnalog Stereo Speaker LevelContour/Tone Settings To adjust dynamic rangeTo adjust the contour settings from the remote Tuner ControlsNumeric Buttons Station Presets Memory ButtonDisp Button PTY ButtonTP Button TA ButtonZone 2 Power On/Off Zone 2 OperationControlling Zone 2 from the Main Room Controlling Zone 2 from the Remote LocationMenu Basics Navigation ButtonsSystem Status Main MenuInput Setup Configuring InputsMulti Input Setup Multi InputConfiguring Understanding Speaker Con- figurationSpeaker Setup Advance Speaker SetupSubwoofer Setup Subwoofer SetupDelay Setup Test ToneCalibration with an SPL meter Contour Setup Other OptionsZone 2 Setup Default SetupTroubleshooting Specifications Rotel of America Rotel EuropeRotel Deutschland

RSX-1057 specifications

The Rotel RSX-1057 is a robust and versatile AV receiver that has garnered attention for its excellent performance and range of features. Designed to meet the demands of home theater enthusiasts, it stands out for its combination of advanced technology, superior audio quality, and user-friendliness.

One of the key features of the RSX-1057 is its robust amplification capabilities. With a power output of 75 watts per channel, it can deliver rich sound across multiple audio channels, making it ideal for multi-channel audio setups. This is complemented by the receiver's high-current design, which ensures dynamic sound reproduction with minimal distortion, even at high volumes.

The receiver supports a wide range of audio formats, including Dolby Digital, Dolby Pro Logic II, DTS, and various music-enhancing technologies. This allows users to experience movies and music in immersive detail, making it a great choice for both film buffs and music lovers alike. The RSX-1057 also features an integrated AM/FM tuner, enabling users to enjoy their favorite radio stations without the need for additional equipment.

In terms of connectivity, the RSX-1057 boasts an impressive selection of input and output options. It includes several HDMI inputs, component video inputs, and composite video connections, making it highly compatible with a variety of devices, from Blu-ray players to gaming consoles. Furthermore, the receiver offers audio outputs that allow for easy integration with subwoofers, enhancing the overall audio experience.

One of the standout technologies in the RSX-1057 is its proprietary ‘Rotel Link’ feature, which enables multi-room audio setups. This function allows users to connect multiple components and create a unified audio system throughout their home. The intuitive remote control enhances the user experience, providing seamless access to browsing and selecting different inputs and settings.

The design of the Rotel RSX-1057 is both aesthetically pleasing and functional. Its sleek chassis features a brushed aluminum front panel, which not only looks great but also minimizes environmental interference. Furthermore, the unit is designed for efficient heat dissipation, ensuring longevity and reliable performance over time.

Overall, the Rotel RSX-1057 is a well-rounded AV receiver that excels in audio fidelity, versatility, and user-centric features. Its commitment to quality and innovation makes it a popular choice for anyone seeking to elevate their home entertainment experience.
Top Page Image Contents