Rotel RSX-1057 owner manual Zone 2 Setup, Default Setup

Page 45

45

English

Zone 2 Setup

ZONE2 SETUP

SOURCE:Off

VOLUME SETUP:Variable

VOLUME:60

TURN ON VOL:Last

MAX VOL:Max

12V TRIGGER:Off

MAIN MENU

The ZONE 2 SETUP menu provides settings and configuration options related to the op- eration of Zone 2. This menu is reached by highlighting the ZONE 2 line on the MAIN menu and pressing ENTER.

SOURCE: Specifies a source for listening in Zone 2. Options are CD, TUNER, TAPE, VIDEO 1–5, SOURCE, and OFF. Selecting the SOURCE option links the Zone 2 source to the source selected for the main zone so that Zone 2 will hear the same source as the main zone. Selecting the OFF option turns Zone 2 off.

VOLUME SETUP: configures the Zone 2 outputs for VARIABLE or FIXED volume lev- els. VARIABLE allows control of the volume settings in Zone 2 from the RSX-1057 front panel or from a remote control/IR repeater in Zone 2. FIXED output disables the Zone 2 volume control. In this mode, the Zone 2 level can be fixed at the level specified on the next line, thus optimizing system perfor- mance when sending a fixed level signal to a preamp or amplifier with its own volume adjustment.

VOLUME: In VARIABLE output mode, this line shows the current volume setting for Zone 2. In FIXED output mode, this volume setting establishes a permanent fixed output level for Zone 2.

Move the highlight to the desired line using the UP/DOWN buttons and use the +/– but- tons to adjust the volume level. To return to the MAIN menu, press the ENTER button. Press the MENU/OSD button on the remote to cancel the display and return to normal operation.

TURN ON VOL: Specifies a default volume level to be used each time Zone 2 is acti- vated. You can select LAST to have Zone 2 activate with the last previously used volume setting. Or, you specify a volume from MIN (full mute) to MAX, in 1dB increments. Note that this setting cannot exceed the MAX VOL established in the next line of the menu.

MAX VOL: Specifies the maximum volume level for Zone 2. The volume cannot be ad- justed above this level. Settings range from MIN to MAX, in 1dB increments.

12V TRIGGER: The RSX-1057 has three12V trigger outputs that supply a 12V DC signal to turn on Rotel components and other com- ponents as needed. The 12V Trigger labeled ZONE 2 is assigned to Zone 2 and can send

aturn-on signal to remote components when- ever Zone 2 is activated. Select the appro- priate setting from eight options to have the ZONE 2 trigger output send the turn-on sig- nal. The options that will activate the Zone 2 trigger are: zone, 1+zone, 2+zone, and ALL. The options that will disable the Zone 2 trigger are: 1, 2, 1+2, and No.

Default Setup

DEFAULT SETUP

TUNER SETTING:N.America

FRONT REDIRECT:Front

FACTORY DEFAULT:No

USER DEFAULT:No

SET USER DEFAULT:No

MAIN MENU

The DEFAULT SETUP menu provides access to six functions:

•Set the tuning function for North Ameri- can or European frequencies.

•Redirect the front channel amplifiers to power center back speakers or speakers in Zone 2 speakers.

•Restore all features and settings to the original FACTORY DEFAULT settings.

•Memorize a custom group of settings as a USER DEFAULT.

•Activate the memorized USER DEFAULT settings.

To change the TUNER setting: Place the highlight on the TUNER SETTING line using the UP/DOWN buttons and use the +/– but- tons to change the setting to N. AMERICA or EUROPE. Then, move the highlight to the FACTORY DEFAULT line and change the set- ting to YES as described above. The screen will change to a confirmation screen. Press the ENTER button to proceed with resetting the FACTORY DEFAULT settings and changing the TUNER SETTING. To return to the MAIN menu without resetting the FACTORY DEFAULT and TUNER settings, change the entry to NO and press the ENTER button.

To change the FRONT REDIRECT set- ting: Place the highlight on the FRONT REDI- RECT line using the UP/DOWN buttons and use the +/– buttons to change the setting to FRONT SP (for powering front speakers), CB SP (for powering center back speakers), or ZONE SP (for powering speakers in zone 2). If you redirect the internal amplifiers, then you will need a separate stereo amplifier to drive your front speakers.

NOTE: Changing the default TUNER SETTING or REDIRECT SETTING can only done at the same time as restoring the FACTORY DEFAULT settings. Therefore, we recommend selecting your default TUNER and REDIRECT settings and resetting to the FACTORY DEFAULT set- tings as the first step in configuring the unit, before you change or memorize any other configuration settings.

To restore the FACTORY DEFAULT set- tings: Place the highlight on the FACTORY DEFAULT line using the UP/DOWN buttons and use the +/– buttons to change the set- ting to YES. Press the ENTER button to pro- ceed with resetting the FACTORY DEFAULT settings. The unit will power off and then on, with the factory settings restored. To return to the MAIN menu without resetting the FAC- TORY DEFAULT settings, change the entry to NO and press the ENTER button.

NOTE: Resetting to factory default settings will erase all stored settings including delay settings, speaker settings, balance settings, input settings and more. You will lose ALL system configuration settings. Be certain that you wish to do so before resetting the fac- tory defaults.

Page 44 Page 46
Image 45
Page 44 Page 46
Contents RSX-1057 10 cm Cm 4 FCC Information Important Safety InstructionsControls and Connections RR-1060 Remote EnglishConnecting the Speakers Digital Video Connections TV Analog Connections DVD Player Analog Connections English Monitor OUT Hdmi VCR Analog Connections CD Player/CDR Recorder ConnectionsAM and FM Antennae Connections Audio Recorder ConnectionsOn-Screen Menus Contents Specifications Menu BasicsKey Features About RotelGetting Started Unpacking PlacementCD Inputs Tape InputsVideo 1-3 Audio Outputs Video 1-5 Audio InputsMulti Inputs Speaker OutputsComposite Video Outputs Composite Video InputsVideo 1-5 S-Video Inputs Video 1-3 S-Video OutputsOther Connections Digital Audio Input & OutputsComputer I/O REM in JacksCD Player Cable, Satellite, Hdtv TunerVCR or Digital Video Recorder Audio RecorderDVD-A or Sacd Player TV MonitorRedirect Feature Connecting a SubwooferSpeakers AmplifiersFront Panel Overview RSX-1057Using the RR-1060 Audio Button Volume Knob Volume ButtonStandby Button Power Button REC ButtonsBasic Operations Selecting Inputs Dolby Surround Dolby Pro Logic Overview Surround FormatsDolby Digital DTS DTS 96/24Dolby Digital Surround EX DTS Neo67.1 Channel Surround Dolby Pro Logic 7.1 Channel SurroundOther Digital Formats Manually Selecting Surround ModesDolby Digital 2.0 discs Dolby Digital 5.1 discs Dolby Digital Surround EX discsMpeg Multichannel discs DTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discsDigital Stereo discs PCM, MP3, and Hdcd On a 6.1/7.1 system with a DTSGroup Delay Other SettingsAnalog Stereo Speaker LevelTo adjust dynamic range Contour/Tone SettingsTo adjust the contour settings from the remote Tuner ControlsMemory Button Numeric Buttons Station PresetsPTY Button Disp ButtonTP Button TA ButtonZone 2 Operation Zone 2 Power On/OffControlling Zone 2 from the Main Room Controlling Zone 2 from the Remote LocationNavigation Buttons Menu BasicsSystem Status Main MenuConfiguring Inputs Input SetupMulti Input Multi Input SetupUnderstanding Speaker Con- figuration ConfiguringAdvance Speaker Setup Speaker SetupSubwoofer Setup Subwoofer SetupDelay Setup Test ToneCalibration with an SPL meter Other Options Contour SetupDefault Setup Zone 2 SetupTroubleshooting Specifications Rotel of America Rotel EuropeRotel Deutschland

RSX-1057 specifications

The Rotel RSX-1057 is a robust and versatile AV receiver that has garnered attention for its excellent performance and range of features. Designed to meet the demands of home theater enthusiasts, it stands out for its combination of advanced technology, superior audio quality, and user-friendliness.

One of the key features of the RSX-1057 is its robust amplification capabilities. With a power output of 75 watts per channel, it can deliver rich sound across multiple audio channels, making it ideal for multi-channel audio setups. This is complemented by the receiver's high-current design, which ensures dynamic sound reproduction with minimal distortion, even at high volumes.

The receiver supports a wide range of audio formats, including Dolby Digital, Dolby Pro Logic II, DTS, and various music-enhancing technologies. This allows users to experience movies and music in immersive detail, making it a great choice for both film buffs and music lovers alike. The RSX-1057 also features an integrated AM/FM tuner, enabling users to enjoy their favorite radio stations without the need for additional equipment.

In terms of connectivity, the RSX-1057 boasts an impressive selection of input and output options. It includes several HDMI inputs, component video inputs, and composite video connections, making it highly compatible with a variety of devices, from Blu-ray players to gaming consoles. Furthermore, the receiver offers audio outputs that allow for easy integration with subwoofers, enhancing the overall audio experience.

One of the standout technologies in the RSX-1057 is its proprietary ‘Rotel Link’ feature, which enables multi-room audio setups. This function allows users to connect multiple components and create a unified audio system throughout their home. The intuitive remote control enhances the user experience, providing seamless access to browsing and selecting different inputs and settings.

The design of the Rotel RSX-1057 is both aesthetically pleasing and functional. Its sleek chassis features a brushed aluminum front panel, which not only looks great but also minimizes environmental interference. Furthermore, the unit is designed for efficient heat dissipation, ensuring longevity and reliable performance over time.

Overall, the Rotel RSX-1057 is a well-rounded AV receiver that excels in audio fidelity, versatility, and user-centric features. Its commitment to quality and innovation makes it a popular choice for anyone seeking to elevate their home entertainment experience.
Top Page Image Contents