Rotel RSX-1057 Zone 2 Operation, Zone 2 Power On/Off, Controlling Zone 2 from the Main Room

Page 36

RSX-1057Surround Sound Receiver

Zone 2 Operation

The RSX-1057 provides Zone 2 multi-room capability, allowing you to enjoy music and operate the system from a second room. From the remote location, you can select a source component (independent from the source playing in the main room), adjust the volume level in the remote zone, and oper- ate the source components.

To use the Zone 2 capability, you need addi- tional components: a pair of speakers installed in the remote zone, an amplifier to drive them, an optional TV monitor for video signals, and a third-party IR repeater system.

Zone 2 can be controlled from the main room using RSX-1057’s front panel or remote con- trol ZONE button. Operation from the remote zone requires the installation of an infrared repeater system (Xantech, Niles, etc.) which relays infrared remote control commands from Zone 2 to the ZONE REM IN connec- tor on the back of the RSX-1057.

Several points to keep in mind about the Zone 2 function:

•There are two options for the Zone 2 output level, selectable from the OSD configura- tion menu. VARIABLE output provides full adjustment of the volume level. FIXED output disables the Zone 2 volume control with the output permanently set to a specified level. This might be useful for sending a line level signal to a preamp or integrated amp with its own volume control or to a distribution amplifier with multiple volume controls.

•The RR-1060 remote control supplied with the RSX-1057 will operate Zone 2 if used with a repeater system from the remote zone. It can also be programmed to op- erate Rotel source components via the RSX-1057’s IR OUT jack.

•Any source component connected to the RSX-1057’s analog inputs can be sent to the Zone 2 outputs. ZONE 2 operates in- dependently of the main room. You can select a different source or adjust Zone 2 volume without affecting the MAIN out- puts in any way.

•Avoid sending the same infrared command to the RSX-1057 front panel sensor and a Zone 2 repeater at the same time. This means that Zone 2 must be in a differ- ent room from the RSX-1057.

36

Zone 2 Power On/Off

Once master power is applied to the unit by pressing the rear panel POWER switch button, the RSX-1057 provides independent power on/off operation for both zones. Pressing the remote control ON/OFF buttons in the main room activates or deactivates the RSX-1057 in the main room only and has no effect on Zone 2. Conversely, activating or deactivat- ing Zone 2 has no effect on the main listening room. However, placing the rear panel master POWER switch in the OFF position completely shuts off the unit, for both zones.

NOTE: For proper power on and off operation with Zone 2, the RSX-1057’s power mode should be set to the factory default STAND- BY setting or to the DIRECT setting using the Other Options menu described in the Setup section of this manual.

Controlling Zone 2 from the Main Room

You can control Zone 2 from the main room using front panel or remote control buttons to activate or deactivate Zone 2, change input sources, and adjust the volume. Controlling Zone 2 from the main room is accomplished by pressing the ZONE button on the front panel or remote, putting the RSX-1057 in Zone 2 control mode temporarily. When the Zone 2 status is displayed, the OSD and/or front panel displays show the current source selection and volume in Zone 2 for ten sec- onds, during which time you can use the front panel VOLUME control and INPUT buttons to change the ZONE 2 settings.

To turn Zone 2 on or off:

1.Press the front panel or remote ZONE but- ton. Zone 2 status appears in the OSD and front panel displays.

2.Within 10 seconds, press the front panel or remote ZONE button to toggle Zone 2 on or off.

3.Following 10 seconds with no commands, the RSX-1057 reverts to normal opera- tion.

To change the Zone 2 input source:

1.Press the front panel or remote ZONE but- ton. Zone 2 status appears in the OSD and front panel displays.

2.Within 10 seconds, press one of the INPUT buttons to select a new source for Zone 2. The name of the selected source ap- pears in the display. Instead of pressing an INPUT button, you can also push the +/– buttons on the remote to step through the inputs.

3.Following 10 seconds with no commands, the RSX-1057 reverts to normal opera- tion.

To change the Zone 2 volume:

1.Press the front panel or remote ZONE but- ton. Zone 2 status appears in the OSD and front panel displays.

2.Within 10 seconds, adjust the volume control on the front panel or remote to change the Zone 2 output level. The new setting appears in the display.

3.Following 10 seconds with no commands, the RSX-1057 reverts to normal opera- tion.

Controlling Zone 2 from the Remote Location

With a properly configured IR repeater sys- tem, you have full control of Zone 2 using an RR-1060 remote from the Zone 2 location. You can select and operate a source, adjust the volume, and turn Zone 2 on or off. Whatever commands you send from the RR-1060 will change Zone 2 and only Zone 2, just as if you were controlling a totally independent audio system in that room. These changes will have no effect on the main listening room.

To turn Zone 2 on or off, press the ON/OFF buttons on the remote. To adjust the volume in Zone 2, press the VOLUME buttons on the re- mote. To select a different analog input source, press one of the DEVICE/INPUT buttons on the remote. You can also use the +/– buttons to step through the source inputs.

NOTE: The volume adjustment is only avail- able if the Zone 2 outputs are configured to use VARIABLE levels. With FIXED levels, the volume control for Zone 2 is disabled.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents RSX-1057 10 cm Cm 4 Important Safety Instructions FCC InformationControls and Connections English RR-1060 RemoteConnecting the Speakers Digital Video Connections TV Analog Connections DVD Player Analog Connections English VCR Analog Connections CD Player/CDR Recorder Connections Monitor OUT HdmiAudio Recorder Connections AM and FM Antennae ConnectionsOn-Screen Menus Contents Menu Basics SpecificationsKey Features About RotelGetting Started Placement UnpackingCD Inputs Tape InputsVideo 1-5 Audio Inputs Video 1-3 Audio OutputsMulti Inputs Speaker OutputsComposite Video Inputs Composite Video OutputsVideo 1-5 S-Video Inputs Video 1-3 S-Video OutputsDigital Audio Input & Outputs Other ConnectionsREM in Jacks Computer I/OCD Player Cable, Satellite, Hdtv TunerAudio Recorder VCR or Digital Video RecorderDVD-A or Sacd Player TV MonitorConnecting a Subwoofer Redirect FeatureSpeakers AmplifiersRSX-1057 Front Panel OverviewVolume Knob Volume Button Using the RR-1060 Audio ButtonStandby Button Power Button REC ButtonsBasic Operations Selecting Inputs Overview Surround Formats Dolby Surround Dolby Pro LogicDolby Digital DTS DTS 96/24DTS Neo6 Dolby Digital Surround EX7.1 Channel Surround Dolby Pro Logic 7.1 Channel SurroundManually Selecting Surround Modes Other Digital FormatsDolby Digital 5.1 discs Dolby Digital Surround EX discs Dolby Digital 2.0 discsDTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discs Mpeg Multichannel discsDigital Stereo discs PCM, MP3, and Hdcd On a 6.1/7.1 system with a DTSOther Settings Group DelayAnalog Stereo Speaker LevelContour/Tone Settings To adjust dynamic rangeTo adjust the contour settings from the remote Tuner ControlsNumeric Buttons Station Presets Memory ButtonDisp Button PTY ButtonTP Button TA ButtonZone 2 Power On/Off Zone 2 OperationControlling Zone 2 from the Main Room Controlling Zone 2 from the Remote LocationMenu Basics Navigation ButtonsSystem Status Main MenuInput Setup Configuring InputsMulti Input Setup Multi InputConfiguring Understanding Speaker Con- figurationSpeaker Setup Advance Speaker SetupSubwoofer Setup Subwoofer SetupDelay Setup Test ToneCalibration with an SPL meter Contour Setup Other OptionsZone 2 Setup Default SetupTroubleshooting Specifications Rotel of America Rotel EuropeRotel Deutschland

RSX-1057 specifications

The Rotel RSX-1057 is a robust and versatile AV receiver that has garnered attention for its excellent performance and range of features. Designed to meet the demands of home theater enthusiasts, it stands out for its combination of advanced technology, superior audio quality, and user-friendliness.

One of the key features of the RSX-1057 is its robust amplification capabilities. With a power output of 75 watts per channel, it can deliver rich sound across multiple audio channels, making it ideal for multi-channel audio setups. This is complemented by the receiver's high-current design, which ensures dynamic sound reproduction with minimal distortion, even at high volumes.

The receiver supports a wide range of audio formats, including Dolby Digital, Dolby Pro Logic II, DTS, and various music-enhancing technologies. This allows users to experience movies and music in immersive detail, making it a great choice for both film buffs and music lovers alike. The RSX-1057 also features an integrated AM/FM tuner, enabling users to enjoy their favorite radio stations without the need for additional equipment.

In terms of connectivity, the RSX-1057 boasts an impressive selection of input and output options. It includes several HDMI inputs, component video inputs, and composite video connections, making it highly compatible with a variety of devices, from Blu-ray players to gaming consoles. Furthermore, the receiver offers audio outputs that allow for easy integration with subwoofers, enhancing the overall audio experience.

One of the standout technologies in the RSX-1057 is its proprietary ‘Rotel Link’ feature, which enables multi-room audio setups. This function allows users to connect multiple components and create a unified audio system throughout their home. The intuitive remote control enhances the user experience, providing seamless access to browsing and selecting different inputs and settings.

The design of the Rotel RSX-1057 is both aesthetically pleasing and functional. Its sleek chassis features a brushed aluminum front panel, which not only looks great but also minimizes environmental interference. Furthermore, the unit is designed for efficient heat dissipation, ensuring longevity and reliable performance over time.

Overall, the Rotel RSX-1057 is a well-rounded AV receiver that excels in audio fidelity, versatility, and user-centric features. Its commitment to quality and innovation makes it a popular choice for anyone seeking to elevate their home entertainment experience.
Top Page Image Contents