Rotel RSX-1057 owner manual Important Safety Instructions, FCC Information

Page 3

Notice

The COMPUTER I/O connection should be handled by authorized person only.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.(TV, radio, etc.)

•Increase the separation between the equipment and receiver

•Connect the equipment to an outlet on circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for additional help.

Caution

This device complies with part 15 of the FCC Rules operation is subject to the following to condi- tions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installer’s attention to Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. See installation diagram.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea- sonable protection against interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio or TV communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the unit and the television tuner.

•Connect the unit to an AC power outlet on a different electrical circuit.

•Consult your authorized Rotel retailer for assistance.

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to mois- ture or water. Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately discon- nect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Fol- low all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ven- tilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than the other. A grounding plug has two blades plus a third grounding prong. These are provided for your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug does not fit your outlet, please consult an electrician for replacement of the ob- solete outlet. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the apparatus. In order to com- pletely disconnect the apparatus from the supply mains, the main plug of the power cordset should be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the power cord is unplugged.

Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or dam- aged in any way. Pay particular attention to the power cord at the plug and where the cord exits the back of the unit.

The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period of time.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when moving the unit in a stand or rack to avoid injury from a tip-over.

Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk of electrical shock.

Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if:

•The power supply cord or plug has been damaged.

•Objects have fallen or liquid has been spilled into the unit.

•The unit has been exposed to rain.

•The unit shows signs of improper operation

•The unit has been dropped or damaged in any way

WARNING: The master power switch is located on the rear panel. The unit must be lo- cated in the open area allowing unobstructed access to the main power switch.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RSX-1057 10 cm Cm 4 FCC Information Important Safety InstructionsControls and Connections RR-1060 Remote EnglishConnecting the Speakers Digital Video Connections TV Analog Connections DVD Player Analog Connections English Monitor OUT Hdmi VCR Analog Connections CD Player/CDR Recorder ConnectionsAM and FM Antennae Connections Audio Recorder ConnectionsOn-Screen Menus Contents Specifications Menu BasicsKey Features About RotelGetting Started Tape Inputs PlacementUnpacking CD InputsSpeaker Outputs Video 1-5 Audio InputsVideo 1-3 Audio Outputs Multi InputsVideo 1-3 S-Video Outputs Composite Video InputsComposite Video Outputs Video 1-5 S-Video InputsOther Connections Digital Audio Input & OutputsCable, Satellite, Hdtv Tuner REM in JacksComputer I/O CD PlayerTV Monitor Audio RecorderVCR or Digital Video Recorder DVD-A or Sacd PlayerAmplifiers Connecting a SubwooferRedirect Feature SpeakersFront Panel Overview RSX-1057REC Buttons Volume Knob Volume ButtonUsing the RR-1060 Audio Button Standby Button Power ButtonBasic Operations Selecting Inputs DTS DTS 96/24 Overview Surround FormatsDolby Surround Dolby Pro Logic Dolby DigitalDolby Pro Logic 7.1 Channel Surround DTS Neo6Dolby Digital Surround EX 7.1 Channel SurroundOther Digital Formats Manually Selecting Surround ModesDolby Digital 2.0 discs Dolby Digital 5.1 discs Dolby Digital Surround EX discsOn a 6.1/7.1 system with a DTS DTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discsMpeg Multichannel discs Digital Stereo discs PCM, MP3, and HdcdSpeaker Level Other SettingsGroup Delay Analog StereoTuner Controls Contour/Tone SettingsTo adjust dynamic range To adjust the contour settings from the remoteMemory Button Numeric Buttons Station PresetsTA Button Disp ButtonPTY Button TP ButtonControlling Zone 2 from the Remote Location Zone 2 Power On/OffZone 2 Operation Controlling Zone 2 from the Main RoomMain Menu Menu BasicsNavigation Buttons System StatusConfiguring Inputs Input SetupMulti Input Multi Input SetupUnderstanding Speaker Con- figuration ConfiguringAdvance Speaker Setup Speaker SetupSubwoofer Setup Subwoofer SetupDelay Setup Test ToneCalibration with an SPL meter Other Options Contour SetupDefault Setup Zone 2 SetupTroubleshooting Specifications Rotel of America Rotel EuropeRotel Deutschland

RSX-1057 specifications

The Rotel RSX-1057 is a robust and versatile AV receiver that has garnered attention for its excellent performance and range of features. Designed to meet the demands of home theater enthusiasts, it stands out for its combination of advanced technology, superior audio quality, and user-friendliness.

One of the key features of the RSX-1057 is its robust amplification capabilities. With a power output of 75 watts per channel, it can deliver rich sound across multiple audio channels, making it ideal for multi-channel audio setups. This is complemented by the receiver's high-current design, which ensures dynamic sound reproduction with minimal distortion, even at high volumes.

The receiver supports a wide range of audio formats, including Dolby Digital, Dolby Pro Logic II, DTS, and various music-enhancing technologies. This allows users to experience movies and music in immersive detail, making it a great choice for both film buffs and music lovers alike. The RSX-1057 also features an integrated AM/FM tuner, enabling users to enjoy their favorite radio stations without the need for additional equipment.

In terms of connectivity, the RSX-1057 boasts an impressive selection of input and output options. It includes several HDMI inputs, component video inputs, and composite video connections, making it highly compatible with a variety of devices, from Blu-ray players to gaming consoles. Furthermore, the receiver offers audio outputs that allow for easy integration with subwoofers, enhancing the overall audio experience.

One of the standout technologies in the RSX-1057 is its proprietary ‘Rotel Link’ feature, which enables multi-room audio setups. This function allows users to connect multiple components and create a unified audio system throughout their home. The intuitive remote control enhances the user experience, providing seamless access to browsing and selecting different inputs and settings.

The design of the Rotel RSX-1057 is both aesthetically pleasing and functional. Its sleek chassis features a brushed aluminum front panel, which not only looks great but also minimizes environmental interference. Furthermore, the unit is designed for efficient heat dissipation, ensuring longevity and reliable performance over time.

Overall, the Rotel RSX-1057 is a well-rounded AV receiver that excels in audio fidelity, versatility, and user-centric features. Its commitment to quality and innovation makes it a popular choice for anyone seeking to elevate their home entertainment experience.
Top Page Image Contents