How to Set the Oven for Cleaning
Quick Reminder:
1.Prepare the oven for cleaning.
2.Close and latch the oven door.
3.Press the AUTO CLEAN or AUTO SELF CLEAN pad.
4.Press the + or – pad.
If you wish to change the preset Clean Time of 3 hours, press the + or – pad until the desired Stop Time appears in the display.
1.Follow the directions in the Before a Clean Cycle section.
2. Close the oven door and slide the latch handle to the right as far as it will go.
Never force the door latch handle. Forcing the handle may damage the door lock mechanism.
3.Press the AUTO CLEAN or AUTO
SELF CLEAN pad.
4.Press the + or – pad until the desired Clean Time is displayed.
The Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.
The
5. When the LOCK light is off, slide the latch handle to the left as far as it will go and open the door.
Operating the Self
To Stop a Clean Cycle
Press the CLEAR/OFF pad. This will stop the cleaning cycle but you will not be able to open the door until the oven cools below the locking temperature.
-Cleaning
After a Clean Cycle
When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.
After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.
If white spots remain, remove them with a
If the oven is not clean after one clean cycle, the cycle may be repeated.
(continued next page)
Oven
25