GE 164 D2966P073, 49-8549 warranty HOW to Set Delay Start of Cleaning on some models, @ick Reminder

HOW to Set Delay Start of Cleaning (on some models)

	(@ick Reminder:	3. Turn the Oven Temperature knob to the AUTO
					SELF CLEAN position.
	1. Latch the door.		(—> 4. Press the START TIME ON/OFF pad.
	2. Turn the Oven Temperature Control knob to			D %YiT
	AUTO SELF CLEAN.
					ONIOFF
	3. Press the START TIME ON/OFF pad.					5. Press the HOUR pad until 9:()() appears in
	4. Press the HOUR and L41N. pads to set the
					A
						the display. The timer is now’ set to start
	time of day you want cleaning to start. The
						cleaning in 2 hours. at 9:00.
	Self-Clean Cycle will automatically begin
					HOUR	The Self-C’lean Cycle will be set to
	at the time yoLl selected.
						automatically begin at 9:00 and finish
Dejay Start is setting the oven timer to start the clean					v	at 1 :20.
cycle automatically at a later time than the present						Both the OVEN ON liszht and the
time of day.						LATCH DOOR light ~ill flash when
For example: Let’s say it is 7:00 and you want the						the Clean Time is finished.
oven to begin self-cleaning at 9:00 after you re		6. When the LATCH DOOR light flashes, slide the
finished in the kitchen. The oven is just soiled a					latch handle to the left as far as it will go, turn the
normal amount so the normal Clean Time of 4 hours					Oven Temperature knob to OFF and open the door.
and 20 minutes is preferred.		Never force the latch handle. Wait until the LATCH
1. Follow steps to prepare the oven for cleaning.
		DOOR light flashes and the latch slides easily.
2. Slide the latch handle to the		Forcing the latch handle may damage the door lock.
	right as far as it w ill go.					(cl)ntin[{t’d tlt t 1 pa qc )

Never force the latch handle. Forcin~ the handle will damage the door lock mechanism.

s

Ul\*

2’7