GE 49-8723 warranty Glass Cooktop Cleaning, For normal, light soil, For heavy, burned on soil

Page 14

GLASS COOKTOP CLEANING

Glass Cooktop Cleaning

Cleaning of glass cooktops is different from cleaning a standard porcelain finish. To maintain and protect the surface of your new glass cooktop follow these basic steps.

Before you use the cooktop for the first time, clean it with cleaning cream. This helps protect the top and makes clean-up easier.

DAILY CLEANING: Use only a recommended cleaning cream, such as Cerama Brite or the Cooktop Cleaning Creme, on the glass cooktop.

For normal, light soil:

1.Rub a few drops (less is better) of the cleaning cream onto soiled area using a damp paper towel. Buff with a dry paper towel until all soil and cream are removed. Frequent cleaning leaves a protective coating which is essential in preventing scratches and abrasions.

2.Clean the surface with the cleaning cream after each use.

For heavy, burned on soil:

1.Apply a few drops of the cleaning cream to the (cool) soiled area.

2.Using a damp paper towel, rub the cream into the burned on area. As with any burned on spill, this may require some effort.

3.Carefully scrape soil with razor scraper. Hold scraper at a 30° angle against the glass cooktop.

4.If any soil remains, repeat the steps listed above. For additional protection, after all soil has been removed, polish the entire surface with the cleaning cream.

5.Buff with a dry paper towel.

NOTE:

•Using a razor scraper will not damage the surface if the 30° angle is maintained.

•Be sure to use a new, sharp razor scraper. Do not use a dull or nicked blade.

•Store the razor scraper out of reach of children.

SPECIAL CARE: Sugary spillovers (such as jellies, fudge, candy syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances. Follow these instructions carefully and remove soil while spill is still hot.

1.Turn off all surface units affected by the spillover. Remove hot pans.

2. Wearing an oven mitt, hold the razor scraper at a 30° angle to the cooktop and scrape hot spill to a cool area outside the surface unit.

3.With the spill in a cool area, use a dry paper towel to remove any excess. Any spillover remaining should be left until the surface of the cooktop has cooled.

Do not continue to use the soiled surface unit until all of the spillover has been removed. Follow the steps under Heavy Soil to continue the cleaning process.

COOKTOP SEAL: To clean the cooktop seal, let a wet cloth rest on it for a few minutes, then wipe clean. Use a mild detergent if needed. Do not use a knife or any sharp object on the seal because it will cut or damage it.

GENERAL INFORMATION: As the cleaning cream cleans, it leaves a protective coating on the cooktop surface. This coating helps to prevent build- up of mineral deposits (water spots) and will make future cleaning easier. Dishwashing detergents remove this protective coating and therefore make the cooktop more susceptible to staining.

To conveniently order more cream and/or scrapers for cleaning your glass cooktop, please call our toll

free number:

 

National Parts Center

800-626-2002

Cleaner

# WX10X300

Scraper

# WX5X1614

Cream and scraper kit

# WB64X5027

PRECAUTIONS

•If pots with a thin overlay of aluminum, copper or enamel are allowed to boil dry, the overlay may bond with the glass cooktop and leave a black discoloration. This should be removed immediately before heating again or the discoloration may be permanent.

•Water stains (mineral deposits) are removable using the cleaning cream or full strength white vinegar.

•Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

14

•If you slide aluminum or copper cookware across the surface of your cooktop, they may leave metal markings which appear as scratches. If this should happen, use the razor scraper and cleaning cream to remove these markings. Failure to remove these residues immediately may leave permanent marks.

•Most cleaners contain ammonia, chemicals and abrasives which can damage the surface of your cooktop. Use only the recommended cleaning cream for proper cleaning and protection of your glass cooktop.

Read and follow all instructions and warnings on the cleaning cream labels.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents UseandCare& Installation Guide Help US Help YOU… Before using your range, read this guide carefullySave time and money Before you request service… Write down the model and serial numbersImportant Safety Instructions Important Safety InstructionsSelf-Cleaning Oven OvenSave These Instructions Cooktop and Radiant Surface UnitsFeatures of Your Range 18 JBP75 JBP76 JBP77 19 JBP78Features of Your Range HOW does this Cooktop Compare To Your OLD ONE? Type of Cooktop Description How it Works RadiantComparison Hot Surface Indicator LightCooktop General Information About Radiant Surface UnitsSurface unit on indicator light will glow How to Set the ControlsCooking Guide for Using Heat Settings Surface ControlsSurface Cookware Tips Surface Cookware TipsSurface Controls Types of CookwareHow to Check Pan Performance Special Cautions for Glass CooktopsCookware Tips Home Canning TipsSurface Home Canning TipsFor normal, light soil Glass Cooktop CleaningGlass Cooktop Cleaning For heavy, burned on soilGlass Features of Your Oven ControlCleaning Features of Your Oven Control Oven CONTROL, Clock and Timer Using Your Oven Oven Control, Clock and Timer Using Your OvenPreheating How to Set Your Range for BakingBaking Baking PansBaking Timed Baking How to Time BakeHow to Set Immediate Start and Automatic Stop Timed Baking How to Set Delay Start and Automatic StopQuestions and Answers Adjust the Oven Thermostat Do IT YourselfThermostat Adjust the OvenRoasting RoastingFrozen Roasts Why is my roast crumbling when I try to carve it?Roasting Guide Broiling BroilingGuide Broiling Guide Beef SteaksBefore a Clean Cycle Operating the SELF-CLEANING OvenSelf-Cleaning Oven Broiling GuideAfter a Clean Cycle How to Set the Oven for CleaningTo Stop a Clean Cycle Operating the Self Cleaning OvenHow to Set Delay Start of Cleaning on some models To remove Care and CleaningOven Light Replacement on some models To replace coverMetal Parts Control Panel and KnobsOven Vent Painted SurfacesOven Heating Elements Do not clean the bake element or the broil elementLift-Off Oven Door Inside of the doorCare and Cleaning Broiler Pan and GridInstallation Instructions Before YOU BeginStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check QUESTIONS? USE this Problem Solver Installation Instructions Problem SolverProblem Solver Oven will not WorkOven will not If YOU Need SERVICE… If You Need Service We’ll Be ThereWarranty

4164D2966P234, 49-8723 specifications

The GE 49-8723,4164D2966P234 is a cutting-edge component designed to meet the demands of modern industrial applications. This part, part of General Electric's extensive lineup, is engineered with advanced technologies and high-performance characteristics that make it a preferred choice in various sectors including manufacturing, energy, and automation.

One of the standout features of the GE 49-8723 is its enhanced reliability. Built with robust materials and sophisticated engineering processes, this component is designed to withstand harsh operating conditions, ensuring minimal downtime and maintenance costs. This reliability is crucial for industries that rely on continuous operation and efficiency.

The technology behind the GE 49-8723 incorporates intelligent sensors that provide real-time data monitoring. These sensors contribute to improved operational visibility, enabling proactive management of systems. By integrating data analytics capabilities, users can track performance metrics and optimize usage, leading to increased productivity and reduced energy consumption.

Another significant aspect of the GE 49-8723 is its compatibility with various control systems. It supports multiple communication protocols, which allows seamless integration into existing infrastructures. This flexibility is essential for manufacturers looking to upgrade their systems without incurring substantial costs or complexities associated with retrofitting.

In addition to its compatibility, the GE 49-8723 offers advanced safety features to protect both the equipment and personnel. It includes built-in fail-safes and redundancy measures that ensure consistent operation even in the event of component failure. This emphasis on safety not only protects investments but also enhances overall workplace safety.

The compact design of the GE 49-8723 also deserves mention. Its smaller footprint allows for easier installation and greater versatility in application, making it suitable for environments with limited space. Despite its size, it does not compromise functionality and performance, making it an ideal choice for various applications.

Overall, the GE 49-8723,4164D2966P234 showcases a balanced combination of reliability, advanced technology, safety, and adaptability. Its innovative design and integration capabilities provide industries with the tools needed to enhance operational efficiency and sustainability, making it a valuable asset in the ever-evolving landscape of industrial applications.
Top Page Image Contents