GE 4164D2966P234, 49-8723 warranty Surface Cookware Tips, Surface Controls, Types of Cookware

Page 11

SURFACE COOKWARE TIPS

Types of Cookware

The following information will help you choose cookware which will give good performance.

Stainless Steel: highly recommended

Especially good with a sandwich clad bottom. The sandwich bottom combines the benefits of stainless steel (appearance, durability and stability) with the advantages of aluminum or copper (heat conduction, even heat distribution).

Aluminum: heavy weight recommended

Good conductivity. Aluminum residues sometimes appear as scratches on the cooktop, but can be removed if cleaned immediately. Because of its low melting point, thin weight aluminum should not be used.

Cast Iron: usable, but not recommended Poor performance. May scratch the surface.

Copper Bottom:

Good performance, but copper may leave residues which can appear as scratches. The residues can be removed, as long as the cooktop is cleaned immediately. However, do not let these pots boil dry. Overheated metal can bond to glass cooktops.

An overheated copper pot will leave a residue that will permanently stain the cooktop.

Porcelain/enamel:

Good performance only with a thick, flat, smooth bottom. Avoid boiling dry, as porcelain can melt and fuse to the surface.

Glass-ceramic:usable, but not recommended Poor performance. May scratch the surface.

Stoneware: usable, but not recommended Poor performance. May scratch the surface.

Surface Controls

• Place only dry pans on the surface units. Do not place lids on the surface units, particularly wet lids.

• We recommend that you use only a flat-bottomed wok. They are available at your

local retail store. The bottom

of the wok should have the same diameter as the surface unit to insure proper contact.

• Do not use woks that have support rings. This type of wok will not heat on glass cooktops.

•Some special cooking procedures require specific cookware such as pressure cookers, deep fat fryers, etc. All cookware must have flat bottoms and be the correct size.

(continued next page)

Surface Cookware Tips

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents UseandCare& Installation Guide Write down the model and serial numbers Before using your range, read this guide carefullySave time and money Before you request service… Help US Help YOU…Important Safety Instructions Important Safety InstructionsOven Self-Cleaning OvenCooktop and Radiant Surface Units Save These Instructions18 JBP75 JBP76 JBP77 19 JBP78 Features of Your RangeFeatures of Your Range Type of Cooktop Description How it Works Radiant HOW does this Cooktop Compare To Your OLD ONE?General Information About Radiant Surface Units Hot Surface Indicator LightCooktop ComparisonSurface Controls How to Set the ControlsCooking Guide for Using Heat Settings Surface unit on indicator light will glowTypes of Cookware Surface Cookware TipsSurface Controls Surface Cookware TipsSpecial Cautions for Glass Cooktops How to Check Pan PerformanceHome Canning Tips Home Canning TipsSurface Cookware TipsFor heavy, burned on soil Glass Cooktop CleaningGlass Cooktop Cleaning For normal, light soilGlass Features of Your Oven ControlCleaning Features of Your Oven Control Oven CONTROL, Clock and Timer Oven Control, Clock and Timer Using Your Oven Using Your OvenBaking Pans How to Set Your Range for BakingBaking PreheatingBaking Timed Baking How to Time BakeHow to Set Immediate Start and Automatic Stop Timed Baking How to Set Delay Start and Automatic StopQuestions and Answers Do IT Yourself Adjust the Oven ThermostatRoasting Adjust the OvenRoasting ThermostatFrozen Roasts Why is my roast crumbling when I try to carve it?Roasting Guide Broiling BroilingGuide Beef Steaks Broiling GuideBroiling Guide Operating the SELF-CLEANING OvenSelf-Cleaning Oven Before a Clean CycleAfter a Clean Cycle How to Set the Oven for CleaningTo Stop a Clean Cycle Operating the Self Cleaning OvenHow to Set Delay Start of Cleaning on some models To replace cover Care and CleaningOven Light Replacement on some models To removePainted Surfaces Control Panel and KnobsOven Vent Metal PartsInside of the door Do not clean the bake element or the broil elementLift-Off Oven Door Oven Heating ElementsBroiler Pan and Grid Care and CleaningBefore YOU Begin Installation InstructionsStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check Installation Instructions Problem Solver QUESTIONS? USE this Problem SolverOven will not Work Problem SolverOven will not If YOU Need SERVICE… We’ll Be There If You Need ServiceWarranty

4164D2966P234, 49-8723 specifications

The GE 49-8723,4164D2966P234 is a cutting-edge component designed to meet the demands of modern industrial applications. This part, part of General Electric's extensive lineup, is engineered with advanced technologies and high-performance characteristics that make it a preferred choice in various sectors including manufacturing, energy, and automation.

One of the standout features of the GE 49-8723 is its enhanced reliability. Built with robust materials and sophisticated engineering processes, this component is designed to withstand harsh operating conditions, ensuring minimal downtime and maintenance costs. This reliability is crucial for industries that rely on continuous operation and efficiency.

The technology behind the GE 49-8723 incorporates intelligent sensors that provide real-time data monitoring. These sensors contribute to improved operational visibility, enabling proactive management of systems. By integrating data analytics capabilities, users can track performance metrics and optimize usage, leading to increased productivity and reduced energy consumption.

Another significant aspect of the GE 49-8723 is its compatibility with various control systems. It supports multiple communication protocols, which allows seamless integration into existing infrastructures. This flexibility is essential for manufacturers looking to upgrade their systems without incurring substantial costs or complexities associated with retrofitting.

In addition to its compatibility, the GE 49-8723 offers advanced safety features to protect both the equipment and personnel. It includes built-in fail-safes and redundancy measures that ensure consistent operation even in the event of component failure. This emphasis on safety not only protects investments but also enhances overall workplace safety.

The compact design of the GE 49-8723 also deserves mention. Its smaller footprint allows for easier installation and greater versatility in application, making it suitable for environments with limited space. Despite its size, it does not compromise functionality and performance, making it an ideal choice for various applications.

Overall, the GE 49-8723,4164D2966P234 showcases a balanced combination of reliability, advanced technology, safety, and adaptability. Its innovative design and integration capabilities provide industries with the tools needed to enhance operational efficiency and sustainability, making it a valuable asset in the ever-evolving landscape of industrial applications.
Top Page Image Contents