GE 49-8723 warranty How to Set the Oven for Cleaning, To Stop a Clean Cycle, After a Clean Cycle

Page 28

OPERATING THE SELF-CLEANING OVEN

(continued)

How to Set the Oven for Cleaning

Quick Reminder:

1.Latch the door.

2.Turn the Oven Temperature knob to

AUTO SELF CLEAN.

If the oven is too hot and you start to set a clean cycle, you will not be able to slide the latch.

Allow additional time for cooling before you try to set the cycle.

1.Follow directions to prepare the oven for cleaning.

2.Slide the latch handle to the right as far as it will go.

Never force the latch handle. Forcing the handle will damage the door lock mechanism.

3.Turn the Oven Temperature knob to AUTO SELF CLEAN. The AUTO SELF CLEAN, AUTOMATIC OVEN, OVEN ON and COOK TIME ON/OFF lights will glow.

NOTE: If you turn the Oven Temperature knob before you slide the latch, the LATCH DOOR light will flash. Slide the latch to the right.

Clean cycle time is normally 4 hours and

20 minutes. On all models except JBP65, you can change the clean time to anywhere between 3 hours and 5 hours, and 59 minutes, depending on how dirty your oven is.

You have one minute to change your clean time. Use the HOUR and MIN. pads to change the total clean time.

Both the OVEN ON light and the LATCH DOOR light will flash when the clean time is finished.

After using the clean cycle, the door latch and the Oven Temperature knob must be returned to their original positions before you can use the oven.

When the LATCH DOOR light flashes, slide the latch handle to the left as far as it will go, turn the Oven Temperature knob to OFF and open the door.

Never force the latch handle. Wait until the LATCH DOOR light flashes and the latch slides easily. Forcing the latch handle may damage the door lock.

To Stop A Clean Cycle

1.Turn the Oven Temperature knob to OFF.

2.Wait until the oven has cooled below the locking temperature to unlatch the door. You will not be able to open the door right away unless the oven has cooled below the locking temperature.

After a Clean Cycle

You may notice some white ash in the oven.

Just wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the Clean Cycle.

If the oven is not clean after one Clean Cycle,

repeat the cycle.

NOTE:

•You cannot set the oven for cooking until the oven is cool enough for the door to be unlatched.

•While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean count down, press the COOK TIME ON/OFF pad.

•If the shelves become hard to slide, wipe the shelf supports with cooking oil.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents UseandCare& Installation Guide Before using your range, read this guide carefully Save time and money Before you request service…Help US Help YOU… Write down the model and serial numbersImportant Safety Instructions Important Safety InstructionsSelf-Cleaning Oven OvenSave These Instructions Cooktop and Radiant Surface UnitsFeatures of Your Range 18 JBP75 JBP76 JBP77 19 JBP78Features of Your Range HOW does this Cooktop Compare To Your OLD ONE? Type of Cooktop Description How it Works RadiantHot Surface Indicator Light CooktopComparison General Information About Radiant Surface UnitsHow to Set the Controls Cooking Guide for Using Heat SettingsSurface unit on indicator light will glow Surface ControlsSurface Cookware Tips Surface ControlsSurface Cookware Tips Types of CookwareHow to Check Pan Performance Special Cautions for Glass CooktopsHome Canning Tips SurfaceCookware Tips Home Canning TipsGlass Cooktop Cleaning Glass Cooktop CleaningFor normal, light soil For heavy, burned on soilCleaning Features of Your Oven Control Features of Your Oven ControlGlass Oven CONTROL, Clock and Timer Using Your Oven Oven Control, Clock and Timer Using Your OvenHow to Set Your Range for Baking BakingPreheating Baking PansBaking How to Set Immediate Start and Automatic Stop How to Time BakeTimed Baking Questions and Answers How to Set Delay Start and Automatic StopTimed Baking Adjust the Oven Thermostat Do IT YourselfAdjust the Oven RoastingThermostat RoastingRoasting Guide Why is my roast crumbling when I try to carve it?Frozen Roasts Guide BroilingBroiling Broiling Guide Beef SteaksOperating the SELF-CLEANING Oven Self-Cleaning OvenBefore a Clean Cycle Broiling GuideTo Stop a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle How to Set Delay Start of Cleaning on some models Cleaning OvenOperating the Self Care and Cleaning Oven Light Replacement on some modelsTo remove To replace coverControl Panel and Knobs Oven VentMetal Parts Painted SurfacesDo not clean the bake element or the broil element Lift-Off Oven DoorOven Heating Elements Inside of the doorCare and Cleaning Broiler Pan and GridInstallation Instructions Before YOU BeginStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check QUESTIONS? USE this Problem Solver Installation Instructions Problem SolverProblem Solver Oven will not WorkOven will not If YOU Need SERVICE… If You Need Service We’ll Be ThereWarranty

4164D2966P234, 49-8723 specifications

The GE 49-8723,4164D2966P234 is a cutting-edge component designed to meet the demands of modern industrial applications. This part, part of General Electric's extensive lineup, is engineered with advanced technologies and high-performance characteristics that make it a preferred choice in various sectors including manufacturing, energy, and automation.

One of the standout features of the GE 49-8723 is its enhanced reliability. Built with robust materials and sophisticated engineering processes, this component is designed to withstand harsh operating conditions, ensuring minimal downtime and maintenance costs. This reliability is crucial for industries that rely on continuous operation and efficiency.

The technology behind the GE 49-8723 incorporates intelligent sensors that provide real-time data monitoring. These sensors contribute to improved operational visibility, enabling proactive management of systems. By integrating data analytics capabilities, users can track performance metrics and optimize usage, leading to increased productivity and reduced energy consumption.

Another significant aspect of the GE 49-8723 is its compatibility with various control systems. It supports multiple communication protocols, which allows seamless integration into existing infrastructures. This flexibility is essential for manufacturers looking to upgrade their systems without incurring substantial costs or complexities associated with retrofitting.

In addition to its compatibility, the GE 49-8723 offers advanced safety features to protect both the equipment and personnel. It includes built-in fail-safes and redundancy measures that ensure consistent operation even in the event of component failure. This emphasis on safety not only protects investments but also enhances overall workplace safety.

The compact design of the GE 49-8723 also deserves mention. Its smaller footprint allows for easier installation and greater versatility in application, making it suitable for environments with limited space. Despite its size, it does not compromise functionality and performance, making it an ideal choice for various applications.

Overall, the GE 49-8723,4164D2966P234 showcases a balanced combination of reliability, advanced technology, safety, and adaptability. Its innovative design and integration capabilities provide industries with the tools needed to enhance operational efficiency and sustainability, making it a valuable asset in the ever-evolving landscape of industrial applications.
Top Page Image Contents