GE 164D3333P200-3 manual Tips Customer Service, All ranges can tip and injury could result

Page 3

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock, or to prevent property damage, personal injury, or loss of life.

WARNING ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-Tip device supplied.

To check if the device is installed and engaged properly, remove the kick panel or storage drawer and inspect the rear leveling leg. Make sure it fits securely into the slot.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this manual. Failure to take this precaution could result in tipping of the range and injury.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

Fluorescent light bulbs contain mercury. If your model has a surface light, you must recycle the fluorescent light bulb according to local, state and federal codes.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■Be sure your appliance is properly installed and grounded by a qualified installer in accordance with the provided installation instructions.

■Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

■Do not attempt to repair or replace any part of your range unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■Before performing any service, disconnect the range power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

■Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

■Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury.

3

Tips Customer Service

Page 2 Page 4
Image 3
Page 2 Page 4
Contents GE Appliances Two easy ways to register your appliance GE & You, a Service PartnershipStaple sales slip or cancelled check here Write the model and serial numbers hereAll ranges can tip and injury could result Tips Customer ServiceCook Meat and Poultry THOROUGHLY… Radiant Surface Units Tips Care Customer ServiceUsing the surface units SafetyCare and Cleaning Troubleshooting Tips Customer Service About the radiant surface units… Temperature LimiterTroubleshooting Tips Care InstructionsSelecting types of cookware Using the oven controls Troubleshooting Tips Care and CleaningCustomer Service Tones at the End of a Timed Cycle Special features of your oven controlFahrenheit or Celsius Temperature Selection Hour Shut-OffControl Lockout on some models Your control is set to use a 12 hour clockStart pad Safety Instructions Operating Using Convection ConversionCook and Hold Before you begin… Care and CleaningTroubleshooting Tips Preheating and Pan PlacementHow to Set the Oven for Broiling Broiling GuideHI Broil Using the clock and timer Cleaning OperatingInstructions Safety How to Set a Delayed Start and Automatic Stop Using the timed baking and roasting featuresService How to Set an Immediate Start and Automatic StopUsing the probe on some models Operating Instructions SafetyTips Adapting Recipes… Using the convection ovenConvection Bake Convection RoastMulti-Shelf Baking How to Set the Oven for Convection Baking or RoastingPaper and Plastic Metal and GlassTouch the Convection Roast pad Troubleshooting Tips Customer ServiceMeats Convection Roasting GuideUsing the timed features for convection baking Operating Instructions Care and CleaningTouch the Convection Bake pad To Adjust the Thermostat Adjust the oven thermostat-Do it yourselfSafety Instructions Customer Service Troubleshooting Tips CareUsing the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning Customer Service Troubleshooting Tips Care and Cleaning After a Clean CycleHow to Delay the Start of Cleaning Care and cleaning of the range Instructions Care and CleaningOperating Oven Shelves and Convection Roasting Rack Lift-Off Oven DoorCare and Cleaning Special Care for Sugary Spills Cleaning the glass cooktopNormal Cleaning For Heavy, Burned-On Soil…Problem Possible Causes What To Do Before You Call For Service…Food does not Oven temperatureFood does not bake Or roast properlyIs on when you want Clock and timer doDuring a clean cycle Clean cycleDisplay goes blank Control signals afterPower outage Or start timeCustomer Service Customer Service Troubleshooting Tips Care and Cleaning We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Electric Range WarrantyGE Will Provide What GE Will Not CoverGE Answer Center Service Telephone Numbers

164D3333P200-3, 49-8973-2 01-00 JR specifications

The GE 49-8973-2 01-00 JR,164D3333P200-3 is a cutting-edge industrial product from General Electric, known for its robust design and innovative technologies. This equipment is part of GE's broader portfolio, which is recognized globally for its reliability and performance across various sectors.

One of the main features of this model is its advanced control system, which ensures precise operation in demanding environments. This control system is complemented by an integrated monitoring solution that provides real-time data on performance metrics, enabling proactive maintenance and minimizing downtime.

The GE 49-8973-2 utilizes high-grade materials engineered to withstand extreme conditions. This characteristic is crucial for sectors like aerospace and energy, where equipment must endure high stress and temperature variations. The quality of construction not only enhances durability but also contributes to the overall efficiency of the system.

In terms of technology, this model is equipped with state-of-the-art sensors that offer comprehensive data analytics capabilities. These sensors help in monitoring operational parameters such as temperature, pressure, and vibration, thus facilitating effective decision-making processes. Users benefit from enhanced operational insights, allowing for more informed strategies regarding maintenance and performance optimization.

Another remarkable aspect of the GE 49-8973-2 is its energy efficiency. The system is designed to minimize energy consumption while maximizing output. This focus on sustainability aligns with global industry trends toward reducing carbon footprints and operational costs.

The GE 49-8973-2 also incorporates flexible modular architecture, which allows for easy upgrades and scalability. This feature is particularly beneficial for companies looking to expand their operations without the necessity of overhauling existing equipment.

Safety is a paramount consideration in the design of the GE 49-8973-2, featuring multiple fail-safes and emergency shutdown protocols to protect users and assets. These safety measures ensure compliance with international industry standards and make the unit suitable for high-risk environments.

In conclusion, the GE 49-8973-2 01-00 JR,164D3333P200-3 stands out due to its innovative control systems, durable materials, advanced sensor technologies, energy efficiency, and emphasis on safety. These characteristics make it an invaluable asset for industries demanding reliability and high performance, ensuring it remains at the forefront of industrial solutions.
Top Page Image Contents