GE 49-8973-2 01-00 JR manual Lift-Off Oven Door, Oven Shelves and Convection Roasting Rack

Page 28

Instructions

Care and cleaning of the range.

Troubleshooting Tips Care and Cleaning Operating Instructions Safety

Locked position

Unlocked position

Pull the hinge locks down to the unlocked position.

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket—it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Lift-Off Oven Door

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Each hinge has a hinge lock. Using a tool, pull the hinge locks down against the door frame.

Firmly grasp the door at the top sides.

Close the door to the stop position.

Lift the door up and pull straight out.

To replace the door:

Firmly grasp the door at the top sides.

This is critical.

Approach the range with the door angled in a vertical position.

Guide the hinges into the slots.

Push door in firmly while opening.

Once in position, open the door completely. Push the hinge locks back in towards the front frame.

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

■The area outside the gasket and the door liner can be cleaned with a soap- filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Roasting rack

Oven Shelves and Convection Roasting Rack

Customer Service

Oven shelf

Offset shelf

28

Clean the oven shelves and the convection roasting rack with an abrasive cleanser or steel wool. After cleaning, rinse the shelves and rack with clean water and dry with a clean cloth.

NOTE: The oven shelves and convection roasting rack may be cleaned in the self- cleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle.

To make the shelves slide more easily apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents GE Appliances GE & You, a Service Partnership Staple sales slip or cancelled check hereWrite the model and serial numbers here Two easy ways to register your applianceTips Customer Service All ranges can tip and injury could resultCook Meat and Poultry THOROUGHLY… Radiant Surface Units Customer Service Tips CareSafety Using the surface unitsCare and Cleaning Troubleshooting Tips Customer Service Temperature Limiter Troubleshooting Tips CareInstructions About the radiant surface units…Selecting types of cookware Troubleshooting Tips Care and Cleaning Using the oven controlsCustomer Service Special features of your oven control Fahrenheit or Celsius Temperature SelectionHour Shut-Off Tones at the End of a Timed CycleYour control is set to use a 12 hour clock Control Lockout on some modelsStart pad Using Convection Conversion Safety Instructions OperatingCook and Hold Care and Cleaning Troubleshooting TipsPreheating and Pan Placement Before you begin…Broiling Guide How to Set the Oven for BroilingHI Broil Cleaning Operating Using the clock and timerInstructions Safety Using the timed baking and roasting features ServiceHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopOperating Instructions Safety Using the probe on some modelsTips Using the convection oven Convection BakeConvection Roast Adapting Recipes…How to Set the Oven for Convection Baking or Roasting Paper and PlasticMetal and Glass Multi-Shelf BakingTroubleshooting Tips Customer Service Touch the Convection Roast padConvection Roasting Guide MeatsOperating Instructions Care and Cleaning Using the timed features for convection bakingTouch the Convection Bake pad Adjust the oven thermostat-Do it yourself Safety InstructionsCustomer Service Troubleshooting Tips Care To Adjust the ThermostatBefore a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning After a Clean Cycle Customer Service Troubleshooting Tips Care and CleaningHow to Delay the Start of Cleaning Instructions Care and Cleaning Care and cleaning of the rangeOperating Lift-Off Oven Door Oven Shelves and Convection Roasting RackCare and Cleaning Cleaning the glass cooktop Normal CleaningFor Heavy, Burned-On Soil… Special Care for Sugary SpillsBefore You Call For Service… Problem Possible Causes What To DoOven temperature Food does not bakeOr roast properly Food does notClock and timer do During a clean cycleClean cycle Is on when you wantControl signals after Power outageOr start time Display goes blankCustomer Service Customer Service Troubleshooting Tips Care and Cleaning We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Electric Range Warranty GE Will ProvideWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYService Telephone Numbers GE Answer Center

164D3333P200-3, 49-8973-2 01-00 JR specifications

The GE 49-8973-2 01-00 JR,164D3333P200-3 is a cutting-edge industrial product from General Electric, known for its robust design and innovative technologies. This equipment is part of GE's broader portfolio, which is recognized globally for its reliability and performance across various sectors.

One of the main features of this model is its advanced control system, which ensures precise operation in demanding environments. This control system is complemented by an integrated monitoring solution that provides real-time data on performance metrics, enabling proactive maintenance and minimizing downtime.

The GE 49-8973-2 utilizes high-grade materials engineered to withstand extreme conditions. This characteristic is crucial for sectors like aerospace and energy, where equipment must endure high stress and temperature variations. The quality of construction not only enhances durability but also contributes to the overall efficiency of the system.

In terms of technology, this model is equipped with state-of-the-art sensors that offer comprehensive data analytics capabilities. These sensors help in monitoring operational parameters such as temperature, pressure, and vibration, thus facilitating effective decision-making processes. Users benefit from enhanced operational insights, allowing for more informed strategies regarding maintenance and performance optimization.

Another remarkable aspect of the GE 49-8973-2 is its energy efficiency. The system is designed to minimize energy consumption while maximizing output. This focus on sustainability aligns with global industry trends toward reducing carbon footprints and operational costs.

The GE 49-8973-2 also incorporates flexible modular architecture, which allows for easy upgrades and scalability. This feature is particularly beneficial for companies looking to expand their operations without the necessity of overhauling existing equipment.

Safety is a paramount consideration in the design of the GE 49-8973-2, featuring multiple fail-safes and emergency shutdown protocols to protect users and assets. These safety measures ensure compliance with international industry standards and make the unit suitable for high-risk environments.

In conclusion, the GE 49-8973-2 01-00 JR,164D3333P200-3 stands out due to its innovative control systems, durable materials, advanced sensor technologies, energy efficiency, and emphasis on safety. These characteristics make it an invaluable asset for industries demanding reliability and high performance, ensuring it remains at the forefront of industrial solutions.
Top Page Image Contents