Amana ART6510 Care and Cleaning, Removing Oven Door Replacing Oven Light, Removing Storage Drawer

Page 19

Care and Cleaning

Removing Oven Door

Replacing Oven Light

CAUTION

To avoid personal injury or property damage, handle oven door with care.

Door is heavy and can be damaged if dropped.

Avoid placing hands in hinge area when door is removed. Hinge can snap closed and pinch hands.

Do not scratch or chip glass, or twist door. Glass may break suddenly.

Replace door glass if damaged.

Do not lift door by handle.

1.Open door fully.

2.Remove screws.

Oven doors are attached with a screw on each side of lower oven door.

3.Close door to first stop, grasp door firmly on each side, and lift upward until door is off hinges.

(Figure 18)

Do not lift door by handle. Glass can break.

Only push hinges closed once oven door is removed if necessary. Use both hands when closing hinge. Hinge snaps closed.

Figure 18

WARNING

To avoid risk of burns or electrical shock, disconnect electrical supply to oven before changing light bulb.

Before replacing light bulb make sure bulb is cool.

Wear protective gloves.

Do not operate oven without bulb and cover in place.

1.Disconnect electrical supply.

2.Remove oven door if desired.

3.Unscrew light bulb cover located in rear of oven cavity. Then turn light bulb counterclockwise to remove. (Figure 20)

4.Replace light bulb with 120-volt, 40-watt appliance bulb.

Do not overtighten bulb or it may be difficult to remove later.

5.Replace light bulb cover and oven door before use.

6.Reconnect power supply.

Figure 20

Replacing Fluorescent Light Bulb (Some Models)

1.Lift up on front edge of backguard top trim. Flip top trim towards rear of backguard. (Figure 21)

2.Twist fluorescent bulb to remove it from sockets.

Removing Storage Drawer

1.Slide drawer out until it stops.

2.Grasp drawer sides near back of drawer. (Figure 19)

3.Lift up and out.

• Reverse to reinstall.

CAUTION

Wear gloves to protect hands from accidental bulb breakage.

Lift

Figure 19

Figure 21

 

19

Image 19
Contents Customer Please Read Manual Before Operating Range InstallerContents ALL Appliances Important Safety InformationOven Fires PrecautionsCase of Fire Surface Element FireCabinet Opening InstallationPacking Material Range LocationLine Voltage Requirements Anti-tip Bracket InstallationPower Supply Location Irregular Cabinet and Countertop HeightsInstalling 3-Wire Power Cord Power Cord RequirementsRange Terminal Block Level Range Installing 4-Wire Power CordConverting 3-Wire to 4-Wire Power Cord Removal and Replacement of RangeCooking with Smoothtop Elements Surface Element SettingsOperation Operating Surface ElementsTo use both inner and outer element Dual Radiant ElementHalogen Element ARH6710 To use inner elementCooking Utensils Type Temperature UsesElectronic Oven Control Figure Self Clean OvenSetting Minute Timer Setting ClockPrepare for Bake, Timed Bake, and Delayed Bake Baking Delayed BakingAdjusting Oven Temperature To Cancel Remaining Cooking TimeBroiling Tips Broiling Prepare for Self-clean Delayed Self-clean CycleSelf-cleaning Interrupt Self-Clean CycleChild Lock Out Service TonesCode Description Poultry Roasting Guide Food Oven Temperature Cooking TimeCooking Guide Baking GuideBroiling Guide Beef and Pork Roasting GuideFood Thickness Rack position Cooking time Removing Storage Drawer Care and CleaningRemoving Oven Door Replacing Oven Light Replacing Fluorescent Light Bulb Some ModelsCleaning Part Materials to Use General Directions Problem Cause To Prevent To Remove Cleaning Smoothtop RangetopProblem Check Before Calling for ServiceCooking Products excluding wall ovens WarrantyQuick Reference Instructions
Related manuals
Manual 8 pages 940 b