Setting the time of day

Know your timer

Timer function buttons::

Minute Minder button

Here you can set a time period of up to 23 hours 59 minutes, that will count down. When it reaches zero, the timer will emit an audible tone.

For example: If you set 20 minutes, the audible tone will occur 20 minutes later.

Auto cooking programme:

Cook Period button

Cook period is the actual length of time for which the timer will switch the oven(s) on as part of an ‘Auto Cooking’ programme.

For example: If you set 2 hours, the food will be cooked for 2 hours.

End Time button

The time of day at which you want an ‘Auto Cooking’ programme to end.

For example: If you set a ‘Cook Period’ for 2 hours, and the end time of 11:00. The timer will switch the oven(s) on at 09:00 and turn the oven(s) off at 11:00. You will hear an audible tone at 11:00, to indicate that the Auto Cooking programme has finished.

●Notes

-When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set, the oven(s) will only operate during the pre- programmed time.

Manual button

Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation.

‘+’ and ‘-’ buttons

Used to adjust the various timer function settings.

Step 1 Make sure all oven controls are turned off. Step 2 Check the electricity supply to the appliance

is turned on.

Step 3 When switched on the display will show 0:00 and AUTO will flash intermittently.

Step 4 Press and hold in both the Cook Period and End Time buttons together.

Step 5 With the Cook Period and End Time buttons still held in, press either the ‘+’ or the ‘-’ buttons to set the correct time of day.

Step 6 Release all buttons simultaneously.

THE TIME OF DAY IS NOW SET.

● To change the time of day repeat Steps 4,5 and 6 above.

● Note

- You cannot adjust the time of day if the timer has been set for an Auto Cooking programme.