Verona VEFSGG 365 ND warranty Important use two spanners to tighten the connection

Page 15

STEP 3

Insert the extension pipe + pressure regulator group in the “A” bracket.

A

A

Fig. 2.2c

STEP 4

Assemble the extension pipe + pressure regulator group to the range manifold interposing the gasket supplied. The regulator cover must be ordiented toward the front side of the range.

IMPORTANT: use two spanners to tighten the connection.

Fig. 2.2d

15

Image 15
Contents Double Oven GAS Range ALL Ranges can TIP DATA PLATE Conversion Label Installation Instructions Electrical Grounding Instructions Replacement PartsProximity to Side Cabinets  installationGAS and Electric Connection Oven 305 Fitting the Adjustable Feet Levelling the CookerMoving the Cooker Backguard or the island trim It is mandatory to installASSEMBLING THE BACKGUARD OR THE ISLAND TRIM28 15/16 735 mm Manual Shut-off Valve .1 Explosion HazardPressure Regulator Lock Pressure Regulator InstallationImportant use two spanners to tighten the connection Page Range Manifold Manifold male Pipe fitting Leak Testing Flexible ConnectionsRigid Pipe Connections CONVERSION TO LP/PROPANE GAS SETTING THE PRESSURE REGULATOR .5INJECTORS TABLE Operations to be Performed When Substituting InjectorsSemirapid and triple ring burners Setting the Burner MinimumOven Burner LEFT and RIGHT OVEN Adjustment of the Oven Burner MinimumRecommended ground method Electrical connectionWiring Diagram Page Page Cod ß1