Verona VEFSGE 365 ND manual Pressure Regulator Installation, Lock

Page 14



PRESSURE REGULATOR INSTALLATION

STEP 1

Mount the 1/2” NPT (conical) male connector to the pressure regulator and tighten by using a wrench.

Do not over tighten the connector. Over tightening may crack regulator.

LOCK

Arrow

Fig. 2.2a

14

STEP 2

Assemble the “A” bracket to the extension pipe.

A

1

2

3

Fig. 2.2b

Image 14

Contents Double Oven Dual Fuel Range ALL Ranges can TIP DATA PLATE Conversion Label Installation Instructions Replacement Parts Electrical Grounding Instructions installation Proximity to Side CabinetsGAS and Electric Connection Oven Vent 305 Moving the Cooker Fitting the Adjustable FeetLevelling the Cooker ASSEMBLING THE BACKGUARD OR THE ISLAND TRIMANTI-TIP Stability Device Installation Instructions 2631/32685 mmGas connection Pressure Regulator Installation LockRegulator cover Page Range Manifold Flexible Connections SETTING THE PRESSURE REGULATOR .5 Operations to be Performed When Substituting Injectors INJECTORS TABLESetting the Burner Minimum Semirapid and triple ring burnersElectrical Connection with Conduit Electrical Connection with Power CordElectrical Requirements Wire Power Cord Installation Wire Conduit Installation Wiring Diagram Electric Diagram KEYPage Page Cod ß1