Sharp R-22FBST, R-21 FBST Before Operation, Setting the Clock, Using the Stop button, Example

R-21+22FBST ENGLISH 22/07/2003 11:41 Page 8

BEFORE OPERATION

Plug in the oven.

1.The oven display will flash:

2.Touch the STOP button the display will show:

x1

To set the clock, see below.

Using the STOP button

Use the STOP button to:

1.Erase a mistake during programming.

2.Stop the oven temporarily during cooking.

3.Cancel a programme during cooking, touch twice.

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.

1.To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button

down for 3 seconds. will appear in the display.

2.To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once

more after Step 1, in the example below will appear in the display.

To set the clock, follow the example below.

Example:

To set the 24 hour clock to 23:35.

1. Choose the clock function.	Choose the 24 hour	2. Set the hours.
(12 hour clock)	clock.	Rotate the TIMER/WEIGHT
		knob until the correct hour is
		displayed (23).

x1and hold	x1
for 3 secs.

x1 and hold for 3 secs.

3.Press the MICROWAVE POWER LEVEL button to change from hours to minutes.

x1

4.Set the minutes.

Rotate the TIMER/WEIGHT knob until the correct minute is displayed (35).

5. Press the MICROWAVE POWER	Check the display.
LEVEL button to start the clock.

x1

NOTE:

1.You can rotate the TIMER/WEIGHT knob clockwise or counter-clockwise.

2.Press the STOP button if you make a mistake during programming.

3.If the electrical power supply to your microwave oven is interrupted, the display will intermittently

show after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

4.When you want to reset the time of day, follow the above example again.

8