Standard
Appearance
Panel
Options
Custom
Panels
Option #1
Option #2
Installation Preparation
Built-In Compactors
The Monogram compactor models ZCG3300 and ZCG3100 come with a white/black reversible aluminum front drawer panel. Model ZCG3300 is shipped with the white panel showing and model ZCG3100 with the black side showing. The panels
on both models can be reversed to reveal the opposite color side. The ZCG3500 comes with a stainless steel wrapped panel.
Go to Step 7, page 12. Follow procedure A for reversing door panel color if desired.
Monogram compactor models ZCG3300 and ZCG3100 | You can: |
are designed to accept a custom front drawer panel to | • Install a 1/4" thick custom panel |
match the surrounding cabinetry. | • 3/4" thick custom panel |
| • 3/4" thick custom panel and custom handle |
|
|
1/4" Thick Wood Panel |
|
|
• Cut panel
Go to Step 7, page 12. Follow procedure B for installation.
3/4" Thick Wood Panel
•Cut panel 12" wide x
The custom 3/4" thick panel replaces the
white/black aluminum panel. Cut edges will be seen and must be finished for best appearance. Both the trim and drawer front panel will be removed to make this installation.
Go to Step 7, page 12. Follow procedure C for installation.
Note: 3/4" thick door panels, both raised and flat design, should be constructed in the same manner as typical cabinet doors. Order the 3/4" custom door panel from the cabinet manufacturer. Be sure to provide the exact dimensions so that the panel is constructed accurately.
4